Jump to content
SAU Community

Ecr33 Rb26det Build. Need Advice.

jdmtom

By jdmtom,
in Engines & Forced Induction

 Share

Recommended Posts

jdmtom Apprentice

jdmtom

Posted
Posted

I have a Full-Race manifold with a twin scroll T4 GT35R, T1R 1000cc Injectors and a power FC.

Fuel questions:

Is a walboro 255 enough to support 550hp and those 1000cc injectors or do i need an aditional bosch inline?

Boost:

What is the safe level that an RB26 that is stock with no head gasket can be set to? 18-20 psi on a 35r?

Clutch:

Whats the most efficient clutch that can be driven daily. I was planing to go Exedy twin disc but that is a little too pricy for me. I was planing to go ACT extreme with a 6 puck sprung but i dont really want a stair master in the car with that heavy pressure plate and am scared about the slave going bad constantly.

Thanks For All the Help

Tom

Link to comment
https://www.sau.com.au/forums/topic/287719-ecr33-rb26det-build-need-advice/
Share on other sites
ali-turko Grand Master

ali-turko

Posted
Posted

i would toss the walbro and get a nismo if funds allow or an 044

and its not boost you should be worring bout its power, i would keep power levels between 300-350kws and thats if its a good condition motor

and whats your budget for a clutch

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Another little story of weird shit happening

      By GTSBoy · Posted

      I'm thinking that this is such a small part of the problem that you could easily forego the vac pump and just achieve 90% of what you need, which is keeping the gate open when off boost. It's not as if there are not already techniques to keep a gate fully closed under boost. After all, you have boost. Just use a wastegate actuator that will allow you to apply the boost on the appropriate side, just like every external gate out there.
    • No1
      R34 Gtt Wheel Offset Advice

      By No1 · Posted

      Heres another fitment photo. redrilled the pattern to 5x112, and threw my audi´s rims on. had to touch the upper control arms with grinder, because the "sharp corner" was sticking about 2-3mm on the tire path. i have the "fender lip" mostly cut off, otherwise these (too) would contact with it. 20x9.5 ET25 rear    265/30 20x8.5 ET20 front    255/30 they are temporary, and look too big for the chassis. searching for 19s to it.
    • niZmO_Man
      Spotted on the street....

      By niZmO_Man · Posted

      beautiful
    • niZmO_Man
      One Headlight isn't working - Driver Side Fuse Keeps blowing

      By niZmO_Man · Posted

      From experience, it will come back to bite you haha.
    • niZmO_Man
      At first I thought these were knock offs....

      By niZmO_Man · Posted

      Background: my BMW 225i hatchback (rebodied MINI/X1) came with 3x RE003 and 1x Goodyear Asymmetric something. The RE003 roared and slid around, the Goodyear side was quiet and grippy. Definitely my car was thrashed before it got sent to dealers. My brother also got RE003 all round on his old VA WRX STI, I wasn't impressed with them, car was loud so can't comment on noise. Anyway, Hankook stopped making/updating V12 Evo2. So bought S1 Evo3 runflats. Great daily duties tyre and not that harsh ride. Tyre reviews site/youtube rated them as best stopping in the rain and I believe them. Next set, Goodyear Asymmetric 5 non-RFT. It beat PS4 in tests and is like $100 cheaper, so put them on. Great tyre, more grip then S1 Evo3 but a tad noisier as expected, still rocking them. Next set I am looking to go runflats, probably the new Hankook Evo. Although the new Pirelli PZ5 did well in tyrereviews test. Or go Goodyear Asymmetric 6 which was top tyre last year. The V12 Evo2 on my gen5 Liberty GT wagon did great in cold condition (drove to snowy mountains for a day so my husky can feel his ancestor's roots). Super impressive performance for $120 each lol. Never skimp on tyres, brakes, suspension. There's old pics of my R31's crappy random brake pads bending in the caliper at Oran Park track day somewhere around here. Anyway, my 2 cents.
×
×
  • Create New...