Jump to content
SAU Community

Recommended Posts

RB25Det block $50. busted pistons. No sump or oil pump. VERY short motor.

RB25 R33 fan shroud $50

RB25 turbo exhaust housing $50. Modified for use with screamer pipe!

RB25 compressor elbow. $20

RB25 Det exhaust valves x 2. Brand new. $100??

3 x actuators. 14 psi. $50 each.

2 x bilstein rear shocks for VB-VL commodore. $50

1 x roll of 15% Professional window tint. Had this for years.. need it gone. Heaps on there. $80

GTR R34 stock turbo's. $650 pair. Great condition.

3L nissan Patrol / navara turbo. VERY low Km's. $200

TZR 250 (89) 2 stroke bike. $400 Bough for go-cart, never got there! 6 spd box..

CA 18 T25 turbine housing.. $10

Holset compressor wheel. Its BIGGER than my GT3040 wheel! $50

Turbo explanation toy! Teach your mates how these things work $10!

VL turbo cross over pipe $50

Sony head unit and 10 stacker.. hardly used (no idea even if it still works) brain cable and remote.. $10

Will happily freight to anywhere.

If you would like more info or photo's, pleaes ask.

open to offers on all things..

post-34369-1252812490_thumb.jpg

post-34369-1252812527_thumb.jpg

post-34369-1252812567_thumb.jpg

post-34369-1252812597_thumb.jpg

post-34369-1252812638_thumb.jpg

post-34369-1252812684_thumb.jpg

post-34369-1252812726_thumb.jpg

post-34369-1252812750_thumb.jpg

post-34369-1252812782_thumb.jpg

post-34369-1252812800_thumb.jpg

post-34369-1252812833_thumb.jpg

post-34369-1252812867_thumb.jpg

post-34369-1252812896_thumb.jpg

post-34369-1252812928_thumb.jpg

post-34369-1252813017_thumb.jpg

post-34369-1252813056_thumb.jpg

The Patrol turbo has a coloured past..

A guy owed me some money, I ended up with the turbo! :happy:

It was the only thing that lived through his engine blow up at (apparently) 15 000km.

Yep, spanking new engine off the shelf broke a piston in 3 bits (so the story goes).

So, as you can see, its VERY clean, shaft play is good, and it is a complete stock (unmodded) 3L diesel turbo as fitted to the 3L patrol. It has a variable Vane turbine housing. I removed to the housing to check it out, and it was also very clean and nothing broken or bent. I am only trying to recover some of the money I lost :) ..

it has a compressor cover A/R 0.53 and the rear A/R 0.64. The turbo has no oil or water fittings attached. Only the actuator for the Variabale vane.

If you wish to look it up, it numbers on the ID tag are:

FD 0402J

14411 - VC100

705954-15.

does that help?

More stuff in the shed!

Supra 2JZ-GTE turbo's.

$200 for both & all the bits in the photo's. Yes, the broken turbine wheel was me :D

Take one or both.. best offer.

post-34369-1252994465_thumb.jpg

post-34369-1252994493_thumb.jpg

post-34369-1252994537_thumb.jpg

post-34369-1252994563_thumb.jpg

Hey Aaron, I'm interested in go Kart engine can you confirm what engine, what condition any rebuid etc...

Cheers

David

  • 7 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...