Jump to content
SAU Community

Recommended Posts

nengun.com greenline.jp perfectrun.com.au rhdjapan.com are probably the 4 cheaper options if you want to import (in no particular order), otherwise if you want to deal with a local try the forum sponsors

Link to comment
https://www.sau.com.au/forums/topic/287785-hks2530/#findComment-4823565
Share on other sites

if you go through nengun be prepared to wait 4 ice ages the return and disappearance of the dinosaurs the earth to be destroyed then rebuilds a new earth called earth 2 then you wait at your new house on earth 2 for another 6-8 months and then you will get an email from nengun advising that you will need to wait another 6 months due to the earth 2 colonization taxes.

Link to comment
https://www.sau.com.au/forums/topic/287785-hks2530/#findComment-4823822
Share on other sites

prob $1500 each turbo 2nd hand... the hks 2530's are very expensive, but the garrett 2860's ( same thing ) are cheaper. u can prob get a set of those for under 2gz 2nd hand. but there are not many people selling them second hand.

so either check out the garrett 2860's or if u save ur money get the 2530's

Link to comment
https://www.sau.com.au/forums/topic/287785-hks2530/#findComment-4825575
Share on other sites

prob $1500 each turbo 2nd hand... the hks 2530's are very expensive, but the garrett 2860's ( same thing ) are cheaper. u can prob get a set of those for under 2gz 2nd hand. but there are not many people selling them second hand.

so either check out the garrett 2860's or if u save ur money get the 2530's

2860-5 ~2500 for a pair new from a sponser IIRC.

Link to comment
https://www.sau.com.au/forums/topic/287785-hks2530/#findComment-4825764
Share on other sites

ok has anyone had any experiance with the gt2860 i want a turbo that can make reasonably good power 230-240rwkw have good response but i mainly want a turbo that comes on hard so yer if anyone has a 2860 can u tell me what sort of power ur making and if it comes on boost hard cos thats mainly what im after response n a turbo that comes on hard

Link to comment
https://www.sau.com.au/forums/topic/287785-hks2530/#findComment-4826207
Share on other sites

if you go through nengun be prepared to wait 4 ice ages the return and disappearance of the dinosaurs the earth to be destroyed then rebuilds a new earth called earth 2 ™ then you wait at your new house on earth 2 ™ for another 6-8 months and then you will get an email from nengun advising that you will need to wait another 6 months due to the earth 2 ™ colonization taxes.

Never had to wait more than a month for anything i bought? New development?

Link to comment
https://www.sau.com.au/forums/topic/287785-hks2530/#findComment-4826355
Share on other sites

2860-5 ~2500 for a pair new from a sponser IIRC.

Correct. Andrew @ Kudos selles them for only $2420 brand new, or something like that. Croydon are $2790 (if you email them).

cjmotor on eBay has a set of 2530s for like $4.5k.

Link to comment
https://www.sau.com.au/forums/topic/287785-hks2530/#findComment-4826465
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • If there's enough meat in the housing where you want to put the M12 adapter, then do it, but be aware that if/when you f**k that up you'll probably be repairing it before doing anything else. I'd just drill it out and tap ina 1/4" thread. No need for rocket surgery when the next most obvious thing will do. You could throw a 1/4 x 1/8 bush in there and use the same fitting you intended to use.
    • Is the only issue that the oil catch can is getting filled on hard runs? I'd be thinking more about oil control issues rather then the head lifting, especially as you aren't seeing spiking in the coolant pressure.  Do you need restrictors in the head, or better drains from the head? Does the sump need venting to the catch can?
    • Tried to make 1/8npt threads into compressor house of the turbo for my EBC. Threads got fu#ked and ended up with and elongated hole, so I do have good amount and nice threads 90% of the hole but 10% I only had 1-2threads there and rest of it is flush on that side of the hole.. So my idea is to do M12 x 1.25 to AN4 with braided lines instead of 1/8npt to 4mm vacuum silicone hose.  and hopefully get a better thread. M12 is quite big and AN4 is a little bit bigger than 4mm (4.9mm inner diameter braided PTFE hose). but this should work. Thoughts? Otherwise I will weld and adapter onto the turbo.   
    • Looks great, I hope everything is working well after all that time!
×
×
  • Create New...