Jump to content
SAU Community

Recommended Posts

I have 3 x 60mm GREddy gauges, Oil pressure, Oil temp, and Exhaust temp, black face, white numbers, electronic, plus wiring and sensors.

I also have an Apexi 60mm boost gauge, black face white numbers plus wiring [boost takes 1/4" hose].

Three plastic stick on dash gauge holder cups and feet 60mm [not for these gauges but they do fit].

NOTE: the oil temp and exhaust temp gauges only need repairs, all else is working fine and well. ie sensors, oil pressure, and boost gauge are fine. These are not smoked or anything, more normal standard gauges.

I have two oil temp sensors [one and a spare?]. Sensors new are +$100 for EGT and OP, $80 for OT, and any gauges with a brand name are way expensive.

Asking:

$70 for the EGT with sensor

$40 for the OT with one sensor, or $70 for all

$40 for the OT sensor only

$100 for the OP with sensor

$100 for the boost gauge

$40 for the gauge holders or $15 each.

Note, the stainless steel cup on the boost gauge is not included, gauge only for sale.

post-5748-1253087225_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/288249-60mm-gauges-greddy-and-apexi/
Share on other sites

Re PM's:

Please note my trader rating, I'll give a money back guarantee [as I do with all sales] supporting this sale. If I say its working then its working and inversely if I say its not working then it isn't, but could be repaired if you know someone or have the skills.

If you look at the photo's the needles are at maximum - not at zero. No idea what is wrong with them, no idea how fixes them, try the yellow pages, maybe Olympic in Pymble, but I don't know.

Basically for those gauges you buy a sensor and get a free gauge, plus a lot of second hand jap auction and ebay gauges have no sensor with them, this lets people that buy them get a cheap sensor.

I know for a fact that new GReddy/Trust sensors are approx. $80 for the oil temp and $216 for the exhaust temp units.

  • 1 month later...

Price drop:

Asking:

$40 for the EGT with sensor

$20 for the OT with one sensor, or $40 for all

$20 for the OT sensor only

$50 for the OP with sensor

$50 for the boost gauge

$10 for the gauge holders or $5 each.

Sick of hoarding stuff!!

Please read the first post though!

Asking:

SOLD for the EGT with sensor

SOLD for the OT with one sensor, or $40 for all

SOLD for the OT sensor only

SOLD for the OP with sensor

$50 for the boost gauge

SOLD for the gauge holders or $5 each.

Apexi boost gauge still for sale

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...