Jump to content
SAU Community

Recommended Posts

Heaps Of Parts Rb's, Gearbox's,garrett, Tial Heaps of performance parts, r32,s13,180,s14,rb25 engine,sr20,2jz,rx7

-RB25det long motor 80,000ks from C34 stagea good compression in car, custom high capacity sump no manifolds or turbo etc includes loom moddified to suit plug and play r32 and std ecu $1700 or with out loom and computer $1500

-Garrett 3082R .82 3 weeks old one dyno run mint condition $1600

-Tial Wastegate 44mm v band type one dyno run old$500

-Custom steam pipe manifold to suit RB 20/25 has 44mm tial gate flange and t3 footprint heat wraped same as 6 boost good condition $750

-R32 tien basic coilovers with king springs 12kg fornt and 10kg rear also have std spring rates 1 month old$600

-R32 fr and rear whiteline adjustable sway bars like new $450

-Custom rb 25 inlet plenum suits just jap 80 or 90mm tb also has adapter and std tb fits perfect looks trick =] $600

- Rb25 VPW fuel rail kit and 6x siemens deka 650cc injectors includes rb25 injector loom with plugs to suit $600

-buddyclub P1's 17x8 and x9 with good tires $1100

- white r32 GTR bonnet and grill (aluminium) perfect condition $400

- r32 newish genuine dmax front bar $300

- ca18det ecu - $60

- rb20/25 high mount stanless manifold, brand new never fitted - $250

-ca s13 power steering pump $50

- s13 sr20 turbo brakes with decent pads lines knuckles lwr control arms etc - $150

-s13 sr engine x member $100

-ca radiator gc $40

-sr s13 gc comes with thermos $40

-heaps of turbo bends elbows pipes to suit sr and 25 $20 each

-s14 handbrake and cables $30

-s2 rx7 manual gearbox gc $200

-2jz turbos and manifolds probs need rebuild $50

-s14 greddy air diversion panel a couple small marks dints etc still works good $50

-ca18 loom has one interior plug misisng$50

-set of 4 17x8 skid rims $400

-s14 std steering wheel $50

-s14 std mirrors white $100

-s14 airbox $60

-s14 clutch fan recently serviced and fan shroud $50

-s13 blinker and wiper stalks air bag type $30 ea

-2x cannon mufflers $50 ea

-2x used sr clutches one is nismo solid centre other is exedy sports button average condition might need a machine $50 each

-ca18 auto gearbox tailshaft gc $100

-sr20 manual tail shaft yoke $80

-rb25 top half plenum no tb $30

-s13 clutch pedal and man brake pedal assy $200

-4x16inch r33/s14 std rims 2 are pink 2 are black no tires $150

-r32 nismo strut brace $50

-sr20 std fpr $10

-rb20 std fpr $10

-6 rb20 injectors $100

seriously heaps of stuff need anything ask

will post up more as i think of it

PM me =]

Located on gold coast or ipswich

Interested in the tailshaft , Can you pm your number ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How dare you sell your unreliable Skyline and buy a reliable, Toyota/Yamaha car with a strong gearbox, torsen LSD and Toyota reliability. At least you won't need to worry about oil pumps, big catch can, oil restrictors, blowing off power steering belts, sheering off 3rd gear, failing ABS relays/pumps, etc.
    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
×
×
  • Create New...