Jump to content
SAU Community

Recommended Posts

NEW PARTS

R33 GTS4 Series 2 VCT N/A Motor rb25de 147kw, 114,000kms motor is in A1 condition, regularly serviced synthetic oils. $1000ono

R33 GTS4 Series 2 4WD Gearbox will fit stageas as well as any other running 4wd gear including GTRs. 114,000kms in good working condition, however 4th started to slightly crunch after I had oil changed too thin, needs thicker oil and will be ok.

$600ono

N/A polished Induction/Intake pipe, in excellent condition gives a nice low end induction growl. Came off R33 rb25de $150ono

Coby Extractors D12, excellent for N/A skyline, in great condition 2.5'' flange $310ono

HKS Super Drager Cat back system in excellent condition check it out on link below.

http://www.skylinesaustralia.com/forums/R3...up-t275336.html

TurboSmart BOV Vee Port w/ skyline adapter in very good condition $110ono

R33 GTR Front 5 Stud Hub Assembly good for 5stud conversions $180ono

Stagea, R32, R33 GTS4 Front swaybar $20ono

R33 GTR Factory Tie Rod Ends $make an offer

Autogauge Smoke Series Vacuum Gauge BRAND NEW $30ono

Stainless steel Cannon Muffler Angle Cut Tip - 2.5'' Inlet, 5.5'' Barrel, 4.5'' Angle cut Tip

Very good condition no dents, came off R33 $45ono

RB20/RB25 Crossover pipe in good condition - $20

LOCATED IN SYDNEY CONTACT NUMBER 0412 297 325

PM if after some pics

did you ever put this car on the dyno when it was NA with the extractors/intake pipe? how much did it make, and moreso, how much torque.

there IS room for the AFM in there right?

never dynoed it but ran mid 14s with extractors/intake/pod/hks system and cat.

With the airbox I have yes there was room for AFM no problems at all, but i'm not sure if it will fit if your using the stock airbox.

woops forgot price

timing belt $50

also got r33 gtst EL instrument cluster white faces, comes with its own wiring where you can switch between colors $40

post-40593-1253611284_thumb.jpg

woops forgot price

timing belt $50

also got r33 gtst EL instrument cluster white faces, comes with its own wiring where you can switch between colors $40

what colours does it go?

from memory, blue, green. Don't remember if there was a 3rd color lol but it wasn't just one color thats for sure

PRICE DROP ON

R33 GTS4 Series 2 VCT N/A Motor rb25de 147kw, 114,000kms motor is in A1 condition, regularly serviced synthetic oils. Only pulled out for conversion. $700ono includes 4WD Sump and Front Diff, wiring loom and ecu and iridium plugs.

REASON: took off some parts as I needed them. These include, water pump, tensioner and idle bearings, harmonic balancer, A/C and pwr/steer pump.

Can throw in a gates timing belt used 10,000kms only for $20 if purchased with motor.

Edited by OoskylineoO

NEW PART ADDED

Whiteline Rear Upper Control Control Arm Bushes BRAND NEW IN PACKAGE, part number is W0579 bought them for $125

$85ono

Fits r32, r33, r34, 180sx, ceferio, etc

PARTS LIST UPDATE

R33 GTS4 Series 2 VCT N/A Motor rb25de 147kw, 114,000kms motor is in A1 condition, regularly serviced synthetic oils. Only pulled out for conversion. PRICE DROP TO $700ono includes 4WD Sump and Front Diff, wiring loom and ecu and iridium plugs.

REASON: took off some parts as I needed them. These include, water pump, tensioner and idle bearings, harmonic balancer, A/C and pwr/steer pump.

Can throw in a gates timing belt used 10,000kms only for $20 if purchased with motor.

R33 GTS4 Series 2 4WD Gearbox will fit stageas as well as any other running 4wd gear including GTRs. 114,000kms in good working condition, however 4th started to slightly crunch after I had oil changed too thin, needs thicker oil and will be ok.

$600ono

N/A polished Induction/Intake pipe, in excellent condition gives a nice low end induction growl. Came off R33 rb25de $150ono

Coby Extractors D12, excellent for N/A skyline, in great condition 2.5'' flange $310ono

HKS Super Drager Cat back system in excellent condition check it out on link below.

http://www.skylinesaustralia.com/forums/R3...up-t275336.html

TurboSmart BOV Vee Port w/ skyline adapter in very good condition $110ono

R33 GTR Front 5 Stud Hub Assembly good for 5stud conversions $180ono

Stagea, R32, R33 GTS4 Front swaybar $20ono

Stainless steel Cannon Muffler Angle Cut Tip - 2.5'' Inlet, 5.5'' Barrel, 4.5'' Angle cut Tip

Very good condition no dents, came off R33 $45ono

RB20/RB25 Crossover pipe in good condition - $20

Gates Timing belt used 10,000kms only $50ono

R33 GTST EL Instrument Cluster white faces Color Changing, comes with its own wiring where you can switch between colors $40

Whiteline Rear Upper Control Control Arm Bushes BRAND NEW IN PACKAGE, part number is W0579 bought them for $125---->$85ono Fits r32, r33, r34, 180sx, ceferio, etc

Open to reasonable offers. Shoot a pm or sms 0412 297 325

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kittens in first to claim dominance of the residence, then puppies later From past experience, the other way around can be problematic to say the least  Those weird "Dobby looking"  little kittens are not cheap....LOL
    • At least yours have parkour down pat. One of mine will still trip over his own shadow and fall over... He's a special type of cat... Ha ha ha
    • The question then becomes - was there any fluid coming from that hole before you did the rebuild ?    You may not have noticed, of course.   Depending on how you did the rebuild, the possibility has to be considered that somehow (cleaning ?)  fluid entered that hole and is now being 'forced'  out by small movements of the proportioning valve.   From the factory, there's actually a small rubber plug in that hole but with age and under-bonnet heat it's quite common for it to 'go missing'.  That rubber plug is designed to allow the venting process but also to prevent 'stuff' getting to the area (prevent corrosion, etc).   The plug is also not available as a spare part AFAIA. Personally I wouldn't race and buy a new master just yet but keep an eye on the area to see if the 'leak' continues.   If you're concerned about brake fluid damaging nearby paintwork, cable tie a piece of suitable absorbant material over the hole and remove/monitor occasionally.    Operation of the proportioning valve and the brake master itself won't be affected, but also keep an eye on brake fluid level, of course. In terms of a new master, the genuine part is getting expensive, unfortunately.  Amayama is showing AUD900+.   I was searching recently and there's an aftermarket part available from Japan made by 'Parts Assist': https://zenmarket.jp/en/yahoo.aspx?q=BNR32%2bBM50&p=1 Whether it's any good I have no idea, although in my experience Japanese aftermarket stuff is pretty good quality-wise.   The above site allows overseas buyers to purchase stuff more easily from Japan but there are fees and shipping costs, of course.   The original Japanese seller page is here: https://auctions.yahoo.co.jp/jp/auction/p1197401228 Copper/Nickel is fine but I still prefer bundy tube and it's also cheaper.
    • Your chihuahuas look weird!
×
×
  • Create New...