Jump to content
SAU Community

R32, R33, Gtst, Gtr, Stagea Parts Clear Out Cheap! New Parts Added

OoskylineoO
 Share

Recommended Posts

OoskylineoO Experienced

OoskylineoO

Posted
  • Author
Posted (edited)

PARTS LIST UPDATE

R33 Series 2 VCT N/A Motor RB25DE 147kw, 114,000kms motor is in A1 condition, regularly serviced synthetic oils. Only pulled out for conversion. PRICE DROP TO $650ono includes 4WD Sump and Front Diff, wiring loom and ecu and iridium plugs. Can also be used in RWD application, just swap sump with a RWD sump.

NOTE: Took off some parts as I needed them. These include, water pump, tensioner and idle bearings, harmonic balancer, A/C and pwr/steer pump.

Can throw in a gates timing belt used 10,000kms only for $20 if purchased with motor.

R33 GTS4 Series 2 4WD Gearbox will fit stageas as well as any other running 4wd gear including GTRs. 114,000kms in good working condition, however 4th started to slightly crunch after I had oil changed too thin, needs thicker oil and will be ok.

$600ono

Coby Extractors D12, excellent for N/A skyline, in great condition 2.5'' flange $310ono

HKS Super Drager Cat back system in excellent condition check it out on link below.

http://www.skylinesaustralia.com/forums/R3...up-t275336.html

R33 GTR Front 5 Stud Hub Assembly good for 5stud conversions $180ono

Stagea, R32, R33 GTS4 Front swaybar $20ono

Stainless steel Cannon Muffler Angle Cut Tip - 2.5'' Inlet, 5.5'' Barrel, 4.5'' Angle cut Tip

Very good condition no dents, came off R33 $45ono

RB20/RB25 Crossover pipe in good condition - $20

Gates Timing belt used 10,000kms only $50ono

R33 GTST EL Instrument Cluster white faces Color Changing, comes with its own wiring where you can switch between colors $40

Whiteline Rear Upper Control Control Arm Bushes BRAND NEW IN PACKAGE, part number is W0579 bought them for $125---->$85ono Fits r32, r33, r34, 180sx, ceferio, etc

BOSCH Oxygen 02 Sensor, used but still in good working order. $40ono

RB25 Flywheel, Factory in good condition fits RB20 as well. $50

Open to reasonable offers. Shoot a pm or sms 0412 297 325

Edited by OoskylineoO
OoskylineoO Experienced

OoskylineoO

Posted
  • Author
Posted (edited)

PARTS LIST UPDATE and PRICE DROPS

R33 Series 2 VCT N/A Motor RB25DE 147kw, 114,000kms motor is in A1 condition, regularly serviced synthetic oils. Only pulled out for conversion. PRICE DROP TO $650ono includes 4WD Sump and Front Diff, wiring loom and ecu and iridium plugs. Can also be used in RWD application, just swap sump with a RWD sump.

NOTE: Took off some parts as I needed them. These include, water pump, tensioner and idle bearings, harmonic balancer, A/C and pwr/steer pump.

Can throw in a gates timing belt used 10,000kms only for $20 if purchased with motor.

R33 GTS4/GTR Series 2 4WD Gearbox will fit stageas as well as any other running 4wd gear including GTRs. 114,000kms in good working condition, however 4th started to slightly crunch after I had oil changed too thin, needs thicker oil and will be ok.

$600ono

HKS Super Drager Cat back system in excellent condition check it out on link below.

http://www.skylinesaustralia.com/forums/R3...up-t275336.html

R33 GTR Front 5 Stud Hub Assembly good for 5stud conversions $170ono

Stagea, R32, R33 GTS4 Front swaybar $20ono

Stainless steel Cannon Muffler Angle Cut Tip - 2.5'' Inlet, 5.5'' Barrel, 4.5'' Angle cut Tip

Very good condition no dents, came off R33 $45ono

RB20/RB25 Crossover pipe in good condition - $20

Gates Timing belt used 10,000kms only $45ono

R33 GTST EL White Faces for Instrument Cluster Color Changing, comes with its own wiring where you can switch between colors $40

Whiteline Rear Upper Control Control Arm Bushes BRAND NEW IN PACKAGE, part number is W0579 bought them for $125---->$80ono Fits r32, r33, r34, 180sx, ceferio, etc

BOSCH Oxygen 02 Sensor, used but still in good working order. $40ono

RB25 Flywheel, Factory in good condition fits RB20 as well. $50

Open to reasonable offers. Shoot a pm or sms 0412 297 325

Edited by OoskylineoO
OoskylineoO Experienced

OoskylineoO

Posted
  • Author
Posted

PARTS LIST UPDATE and PRICE DROPS

R33 Series 2 VCT N/A Motor RB25DE 147kw, 114,000kms motor is in A1 condition, regularly serviced synthetic oils. Only pulled out for conversion. PRICE DROP TO $600ono take it now or it goes to my friend. Includes 4WD Sump and Front Diff, wiring loom and ecu and iridium plugs. Can also be used in RWD application, just swap sump with a RWD sump.

NOTE: Took off some parts as I needed them. These include, water pump, tensioner and idle bearings, harmonic balancer, A/C and pwr/steer pump.

Can throw in a gates timing belt used 10,000kms only for $20 if purchased with motor.

R33 GTS4/GTR Series 2 4WD Gearbox will fit stageas as well as any other running 4wd gear including GTRs. 114,000kms in good working condition, however 4th started to slightly crunch after I had oil changed too thin, needs thicker oil and will be ok.

$500ono

HKS Super Drager Cat back system in excellent condition check it out on link below.

http://www.skylinesaustralia.com/forums/R3...up-t275336.html

R33 GTR Front 5 Stud Hub Assembly good for 5stud conversions $150ono

Stagea, R32, R33 GTS4 Front swaybar $20ono

Stainless steel Cannon Muffler Angle Cut Tip - 2.5'' Inlet, 5.5'' Barrel, 4.5'' Angle cut Tip

Very good condition no dents, came off R33 $40ono

RB20/RB25 Crossover pipe in good condition - $20

Gates Timing belt used 10,000kms only $45ono

R33 GTST EL White Faces for Instrument Cluster Color Changing, comes with its own wiring where you can switch between colors $40

Whiteline Rear Upper Control Control Arm Bushes BRAND NEW IN PACKAGE, part number is W0579 bought them for $125---->$70ono Fits r32, r33, r34, 180sx, ceferio, etc

RB25 Flywheel, Factory in good condition fits RB20 as well. $45

Open to reasonable offers. Shoot a pm or sms 0412 297 325

OoskylineoO Experienced

OoskylineoO

Posted
  • Author
Posted

PARTS LIST UPDATE and PRICE DROPS

NEW PARTS

Whiteline Rear Upper Control Control Arm Bushes BRAND NEW IN PACKAGE, part number is W0579 bought them for $125---->$70ono Fits r32, r33, r34, 180sx, ceferio, etc

Whiteline Subframe Lock and Align kit aka Drift pineapples. Excellent condition no chunks missing no nothing, Only a couple months old, Fits R32 R33 R34 180SX s13 s14 s15 Cefiro Stagea. $75ono

Genuine Momo Steering wheel. In excellent condition, only very minor wear marks. $175ono

R33 Centre Console compartment (compartment bit behind gear boot). Excellent condition, no damages whatsoever. $50

R33 Climate control unit. In good working order no damage. $50

R33 Full Interior panels 2xFront 2xRear. Once again another part in Excellent condition, no marks, no scratches, no tears. $150

R33 Front and Rear Seat Belt sets, Good condition was working perfect when removed. $150

R33 Series 2 VCT N/A Motor RB25DE 147kw, 114,000kms motor is in A1 condition, regularly serviced synthetic oils. Only pulled out for conversion. PRICE DROP TO $590ono take it now or it goes to my friend. Includes 4WD Sump and Front Diff, wiring loom and ecu and iridium plugs. Can also be used in RWD application, just swap sump with a RWD sump.

NOTE: Took off some parts as I needed them. These include, water pump, tensioner and idle bearings, harmonic balancer, A/C and pwr/steer pump.

Can throw in a gates timing belt used 10,000kms only for $20 if purchased with motor.

R33 GTS4/GTR Series 2 4WD Gearbox will fit stageas as well as any other running 4wd gear including GTRs. 114,000kms in good working condition, however 4th started to slightly crunch after I had oil changed too thin, needs thicker oil and will be ok.

$450ono

HKS Super Drager Cat back system in excellent condition check it out on link below.

http://www.skylinesaustralia.com/forums/R3...up-t275336.html

R33 GTR Front 5 Stud Hub Assembly good for 5stud conversions $150ono

Stagea, R32, R33 GTS4 Front swaybar $20ono

Stainless steel Cannon Muffler Angle Cut Tip - 2.5'' Inlet, 5.5'' Barrel, 4.5'' Angle cut Tip

Very good condition no dents, came off R33 $40ono

RB20/RB25 Crossover pipe in good condition - $20

Gates Timing belt used 10,000kms only $45ono

RB25 Flywheel, Factory in good condition fits RB20 as well. $45

Open to reasonable offers. Shoot a pm or sms 0412 297 325

OoskylineoO Experienced

OoskylineoO

Posted
  • Author
Posted (edited)

NEW PART

Whiteline Heavy Duty Front Swaybar BRAND NEW IN PACKAGING. Fits ALL model R33s including NAs except GTS4s and GTRs. Part number is BNF24Z

$200 includes fittings, new bushes etc.

If pics of anything are wanted just request.

Edited by OoskylineoO

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...