Jump to content
SAU Community

Fs: Apexi Power Fc + Hand Controller - Gt3040r, Hks Manifold N Gate

RBLOCO
 Share

Recommended Posts

RBLOCO Contributor

RBLOCO

Posted
Posted

Hi Guys,

Not going through with my upgrades to my car as I'm selling it all...

Located in Sydney West, prefer pick-up.

1. R33 Gtst RB25DET Apexi Power Fc with hand controller - $1300

Tuned to suit front mount, exhaust, fuel pump, 8-12psi. Made 200rwkw on safe tune. Item is like new, used for less then six months by previous owner.

2. HKS Cast iron manifold with external wastegate provision - $750 including HKS genuine wastegate :)

Good condition, perfect for withstanding extreme high temperature's and sudden changes in temperature (drifting). Stop repairing you're stainless mani, go cast iron :) Wastegate is reportedly 38mm, unknown spring pressure (psi). Suit Rb20det/Rb25det

3. GT3040R Garret turbo 0.86 ex housing -$800

Polished front housing with extra elbow already welded in. Previous owner made 300rwkw 22psi. Turbo still in good condition. Was running fine on previous owners car.

Please pm me for my number or email.

Cheers

Daniel

RBLOCO Contributor

RBLOCO

Posted
  • Author
Posted

Will Sell items for a package, though it'd be to big for postage.

Individual prices together equals =$2850

As a package for all items $2500 firm

Will try to get photos soon. :)

email - [email protected]

post-35363-1253172735_thumb.jpg

post-35363-1253172787_thumb.jpg

post-35363-1253172855_thumb.jpg

post-35363-1253172922_thumb.jpg

post-35363-1253172986_thumb.jpg

post-35363-1253173040_thumb.jpg

post-35363-1253173089_thumb.jpg

post-35363-1253173140_thumb.jpg

RBLOCO Contributor

RBLOCO

Posted
  • Author
Posted
Interested in hks manifoldwith wastegate. This has T3 flange i expect ? PM me when can . Thanks

Crap, can't pm till post count is 10 (and ive been a member for 2 1/2 years??).

Anyway, yes it is T3. my dad had the same manifold with the same turbo and it made 282rwkw on an rb20. He had the manifold flow tested and they have really good flow.

RBLOCO Contributor

RBLOCO

Posted
  • Author
Posted
So PFC still available ?

pICS OF MANIFOLD N GATE plse. email: [email protected]

power fc still available atm...

pics of manifold and wastegate are in the above post. email sent anyway >_<

Cheers

Daniel

RBLOCO Contributor

RBLOCO

Posted
  • Author
Posted
hey cud u plz sent me the pics for the pfc to [email protected]. thanks!!

email sent >_<

_____________________________________

Specifications of turbo also known as GT3082R

Specifications:

Horsepower: 600hp

Compressor Housing A/R -: 0.70a/r

Turbine Housing A/R -: 0.82a/r

Turbine Hsg. Attachments: Inlet: Standard 4-bolt T3 flange

Turbine Hsg. Attachments: Outlet: Standard 4-bolt T3 flange

Oil Inlet - : Inverted Flare 7/16-24 thread

Oil Drain - : Standard 2-bolt T3 flange

Bearing Type: Dual Ball Bearing

Cooling: Water Cooled Centre

Wastegate: None (Use with External Wastegate)

Garrett GT3082R Turbocharger. Previously known as GT3040R, GT30R

RBLOCO Contributor

RBLOCO

Posted
  • Author
Posted
Will the power fc definitely work on a S2 33, ive been told the S1 is different to a S2 (im bit confuzed)

As far as I am aware they work on both. The box specifies ECR33 RB25DET, is doesn't say s1 or s2 etc or any type of year model..

Any how, it was previously on a S2 r33.

Honestly, for those that just have front mount, exhaust, fuel pump and a bleed valve with 12psi boost, you will save yourself $600 from getting a full tune. I would only recommmend a dyno run to check if the air fuel ratio is okay etc...a Dyno run cost $80.

Cheers

Daniel

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • PranK
      My new to me M35 Stagea wagon

      By PranK · Posted

      Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Chupapy
      New r33 owner

      By Chupapy · Posted

      Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
×
×
  • Create New...