Jump to content
SAU Community

Recommended Posts

hey guys,

i have a BLACK R34 GTT that i am considering selling for parts as its had a crash, the front left has damage from where it hit a tree.

The engine does still start. Never had any problems with the car

The car had about 120,000kms of genuine kms i have the papers from japan, also have a manual with it.

Car had its 100,000kms service done, and has been serviced every 5000km since. All interior is fine, i will post up some pics soon, its located in geelong, VIC. looking for some interest either in parts or the car as a whole...

Thanks

Link to comment
https://www.sau.com.au/forums/topic/288725-r34-gtt-wrecking-black-rb25det-neo/
Share on other sites

hey mate,

is it a manual? cause im after a manual steering wheel. is the airbag deployed?

is the car a 4 door or 2 door? cause im also interested in the driver side A-pillar

  • Like 1

Hi mate sorry to hear,

Was the car a manual? I might be interested in the clutch and brake pedals, clutch master cylinder and slave cylinder, the tailshaft, the trim around the gear stick.

To do a auto/man conv on a 34.

thanks Gman n msports. it sucks but could b worse :)

i knew id forget things sorry guys, feel free to call or text msg me on 0408340465 (if i dont answer just leave a msg) pm on here or email me [email protected] and i will get back to u ASAP

i seem to be only able to send a couple pms a day though.. so email might be easeir for me to reply to questions than pms.

the car is a manual, and it is a 2 door.

R34wong: cant reply to ya pm sorry coz i have replied to too many but yer sure thing.

Battery: u mean engine and gearbox right? give me an email, call or text please

mainyard: u have dibs then mate

aznbongsta: yer the interior parts thats fine, spoiler i may be keeping sorry, pick up would b fine id have to pull stuff apart first but.

the airbags did not go off

John: its a manual 2 door, airbags didnt come out, and yer the a pillar would b fine too.

msports: thats all fine

Gman: radiator support bar is no good sorry gman

hi mate jsut woundering if ur selling the aircon controls also how much for the rb25det neo?

thanks!

ps: im from geelong too

Edited by Tuff_Skyline

hey tuff, good chance il b selln everything unless i can get the whole thing sold to a single person which i would prefer but may not happen. so yes aircon stuff is fine. battery may have gotten in b4 ya, give me a pm with ur number and il let ya no if things fall through k champ :)

PM's recienved although cant wb to all yet as limited amount of replies a day for some reason... yer bonnet is screwed mate lol, it had an intercooler which has become no good coz it got bent, a pod which is also no good, and a turbo back exhaust which should b fine... it was only lightly modified... and all that was done by my within the last year as i brought it stock as a rock. also had tineted windows, 18 inch speedy inferno wheels black wit silver lip, and aftermarket kenwood sound system... hope that helps, thanks :)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...