Jump to content
SAU Community

Recommended Posts

For Sale

Nissan Skyline R33GTST Series 2 1997

Manual

102402kms

VIN 6u9000ecr3313037a

Engine No. RB25197227A

Has years rego

Just had RWC 2months ago without any problems

Time to sell my skyline..

has been a fantastic car to own and drive! will make someone very happy,

but it has to go due to wanting to buy other toys.

The car is locatated in sale Victoria and as it is a fair way out i am willing to drive to meet those who are interested.

just had a service including new spark plugs, oil, belts, filters etc changed

tune is currently a low boost due to beening daily driven and made 320hp atw (can supply dyno sheets)

has made over 400hp atw on current set up

if i have missed any details please let me know

here is the list of all the goodies it has

Haltech Platium Pro (pre release version)

REPLACED OIL PUMP (at approx 87,000kms)

REPLACED WATER PUMP (at approx 87,000kms)

REPLACED ALL BELTS (at last service)

Tyres are a few hundred kms old

Fuel filter just replaced approx 1000kms ago

BLITZ LM FRONT MOUNT INTERCOOLER

GReddy RADIATOR

ELECTRIC THERMO FANS

SARD COOLING THERMOSTAT

CUSTOM GARRETT TURBO (turbo spec will be supplyed to new owner)

NISMO FUEL PUMP

NISMO 555cc INJECTORS

NEW TOMEI z32 AFM (not hooked up due too haltech ECU)

SOLID INTAKE PIPE

TEIN SUSPENSION – Checked by Fulcrum in Cairns in 2008 – they said it was all good

BRAIDED LINES THROUGOUT ENGINE BAY

SPLITFIRE COILS

TOMEI PON CAMS

SARD FUEL PRESSURE REGULATOR

GREDDY OIL CATCH CAN

NEW RADIATOR HOSES AND SILICON LINES

HKS SSQV BLOW OFF VALVE WITH PLUMB BACK KIT TO MAKE LEGAL

NEW CLUTCH & LIGHT FLYWHEEL– NPC BRAND - Rated to 500rwkw from memory, super bitey with really nice pedal feel.

ALARM (M40mongoose alarm with extra feature add-ons from DEI) –complies with Aust insurance standards.

ALARM TURBO TIMER – BUILT IN

AUTO BOOT RELEASE FROM REMOTE

AUTO HEADLIGHTS

AUTO WINDOW ROLL UP KIT

FEDERAL 595RSR SEMI SLICKS ON REAR (255 wide 17")

FEDERAL SS595 FRONTS (235 wide 17")

CARBON PILLAR TRIMS

NISMO FLOOR MATS

P4004 ROCKFORD AMP

P6001BD ROCKFORD AMP

PIONEER SPLITS

SUPER WHITE HEADLIGHTS

post-46539-1253441124_thumb.jpgpost-46539-1253441356_thumb.jpg[attachmen

t=246965:20092009032.jpg]post-46539-1253441853_thumb.jpgpost-46539-1253442031_thumb.jpgpost-46539-1253442147_thumb.jpgpost-46539-1253442221_thumb.jpg

ASKING $23000 ONO

Cheers Michael 0448445300

post-46539-1253441546_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/288791-skyline-r33gtst-series-2-for-sale/
Share on other sites

Also open to any reasonable offers, pm or msg me anytime

Cheers Michael

Hey mate. Time to sell it on hey?

This is my old car, I can vouch for how much work was done on it - lots of money spent and very fast.

Good luck with the sale - if I wasn't selling off stuff to renovate my house I would be tempted to buy it back hey!.

  • 3 weeks later...
  • 2 weeks later...
  • 1 month later...
  • 2 weeks later...
Hey mate. Time to sell it on hey?

This is my old car, I can vouch for how much work was done on it - lots of money spent and very fast.

Good luck with the sale - if I wasn't selling off stuff to renovate my house I would be tempted to buy it back hey!.

can vouch for this car, replace the clutch in it a while back before it moved on to the thread starter, and it is a very very nice piece of machinery, will dust a 19g r33 gtr EASILY!

no offence but ppl are paying just over 19,000 for r33 gtrs

read what i've said above, i really can vouch for this car, if i didnt have 3 bloody nissans already i'd love to snap this up as a daily driver with alot of grunt!!!! 

  • 4 weeks later...

is anyone out there interested? make me an offer? im starting to really need the money, its a great car as all have said, heaps more in it to!!

  • 1 month later...
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...