Jump to content
SAU Community

r32 Head Unit install, Clock Problem

ANut

By ANut,
in Car Audio & Electrical

 Share

Recommended Posts

sinisteR32 Enthusiast

sinisteR32

Posted
Posted

i know its kind of obvious but it sounds like you might have blown a fuse. check all the fuses and if they are all fine then you may have a short somewhere in your wiring. you may have to rip out most of the dash to find it but hopefully its just at the back of your head unit somewhere.

i just fixed up my mates stuffup with installing his headunit and sub. he didnt solder any wires and he missed a few all together. make sure any wires you dont find a use for get some electrical tape around the ends to stop them shorting on anything.

jake32 Mentor

jake32

Posted
Posted
The Clock Died whilst connecting the Wires to the New Head Unit. Has this happend to anyone else? also the Air Conditioning Contols have Died. Cant figure out What happend. Need Help

it`s a 10amp fuse you have earthed power wire at some time during installation

have done it once or twice my self

raasclaat Mentor

raasclaat

Posted
Posted

yep...i did the same just recently..was using my pocket knife to slice some elec tape on the constant power line. Fried the clock.....15amp fuse

it`s a 10amp fuse  you have earthed power wire at some time during installation

have done it once or twice my self

  • 4 weeks later...
Dahtone Racing Grand Master

Dahtone Racing

Posted
Posted
How difficult is the Stock R32 headunit to remove in a GTR? Is is similar to the R33 headunit guide posted in this forum?

R32 is pretty much straight froward

1. pull up the gear boot plastic trim and take out the ash tray there should be 4 screws 2 behind the ash tray and 2 under the shifter boot

2. then the surround peice should come off

3. there is a bracket holding the HU in 6 screws hold this in, 3 on each side

4. the whole lot should slide out and thats it

i can take pics but mine will be a litle bit different because i have modified my dash

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Julsmadrid
      RB25det

      By Julsmadrid · Posted

      Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • soviet_merlin
      Hypergear ATR45 SAT Turbo With addons (brand new - never used)

      By soviet_merlin · Posted

      Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • Danowner
      Hypergear ATR45 SAT Turbo With addons (brand new - never used)

      By Danowner · Posted

      I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
    • Komdotkom
      R32 Gtst - Track Car

      By Komdotkom · Posted

      Great pic  
    • acsplit
      R32 Gtst - Track Car

      By acsplit · Posted

      Turn up your speakers https://youtu.be/5_GK5ChNjOs?feature=shared
×
×
  • Create New...