Jump to content
SAU Community

R33 Gtst Steering Knuckle On R32 Gtst

NZM.031
 Share

Recommended Posts

NZM.031 Grand Master

NZM.031

Posted
Posted

hey all..

busted my r32 a while back, having no luck finding an r32 lhf steering knuckle.. have found a pair of r33 ones though, with lower control arms, calipers, discs, so basically r33 front suspension. i will be using r33 lca's no matter what knuckle i find.

will this fit the old r32? are the the same or different?? if different how so and what effect will it have??

Habler Rising Star

Habler

Posted
Posted (edited)

Quote from Cazman on NS

"They run a diff upper arm, I have no idea if the metal upright comes off the cast hub and swaps tho"

I sat the two next to each other last week and they were very, very similar. Can't really guarantee they will fit though sorry.

Here are a few pics of r33 knuckles (the shorter ones have been modded) to maybe help.

post-19787-1253762639_thumb.jpg

post-19787-1253762650_thumb.jpg

Edited by Habler
NZM.031 Grand Master

NZM.031

Posted
  • Author
Posted

post-4164-1253838362_thumb.jpg

this is the only pic i have at the moment of my steering knuckle... you can see where its busted near where it mounts to the upright.. it has a nut under that top cover and it looks bloody similar to the r33 ones.. even though the top arm is different.

ive found a pair of modified ones like the ones in that picture and for the same price as 1 x r32 knuckle from a wrecker. and im having trouble finding one on here as a) everyone wants to keep their wrecks rolling and b) noone wants to post them as they are reasonably heavy with the hubs in them.

cheers for the help

Linton

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Josh K.
      Crank Motorsports Front Axles

      By Josh K. · Posted

      The frontend wouldn't go low enough because the coilover was max low and the upper control arm would collapse into itself and potentially bottom out in the strut tower. I made a brace and cut off the kingpin and then moved the upright down 1.25" and welded. i still have to finish but this gives an idea. Now I can have a normal 3.25" of shock travel and things aren't binding. I'm also dropping the lower arm and tie rod 1.25".
    • Josh K.
      Crank Motorsports Front Axles

      By Josh K. · Posted

      Motor and body mockup. Wheel fitment and ride height not set. Last pic shows front ride height after modifying the front uprights to make a 1.25" drop spindle.
    • Josh K.
      Crank Motorsports Front Axles

      By Josh K. · Posted

      Here's Logans Silvia with R32 Drivetrain, mine will be slightly lower (more angle). He was constantly blowing the RH axles at around 16deg. I want to avoid this.    
    • Duncan
      NC MX5

      By Duncan · Posted

      sorted
    • LaurelPWR
      Forced Performance Hta Turbos

      By LaurelPWR · Posted

      Dredgggggeeee time; I have recently finally started driving the car. It sat for so long that the fuel tank gave birth to rust sludge and blocked my lift pump sock and one of my walbro 460's and left grime, rust chunks and muck all through the surge tank and system. I decided to commit and pull the trigger on an oem r32 gtr fuel tank and Frenchys twin 460 / sender / surge tank hanger combo and all new larger lines and fittings etc, also boost doc heater hose kit / new heater core and a heap of other bits and shits like wideband sensor installed in the dump and Syltech iacv + lines and all wired and added to current tune. now having lightly driven it a couple times without issue, I can happily report on the hta3076 in its current tune. still no boost control switched on, 20psi gate springs, car makes 22psi at 3200rpm in 6th gear with 30-50% TPS from cruise at 100kmh. Going by the old graph, this means it should be making 300-325whp at the same numbers above. Very very responsive setup under true road driving loads. all that's left for the build is body loom + PDM, finish the remote aircon setup, install carbon fibre parts and go for full tune and 30psi. the 315 rear tyres are now performing like they're 195's, wheel spin in any gear at almost any rpm, whereas my previous setup hooked up in 3rd no issue, albeit Nt01's back then / RB25 5spd vs (new) old date r888r's Z34 6spd now, + obviously all the support upgrades I listed in the quoted post above. car sits at 1-3psi on cruise at 100kmh, expectations totally exceeded and I'm beyond stoked with all this so far. IMG_4848.mov
×
×
  • Create New...