Jump to content
SAU Community

Recommended Posts

Hey everyone.

Just putting up for sale my 1996 Type X 180sx.

This car was imported over about 3years ago, and I am the second Australian owner.

It has been serviced every 7000km's for the time it has been in my possession, however does not have any Service books. I catch the train to uni, and only drive the car to work and back on the weekends. The car has 160***km’s on it.

The car has a few basic modifications, as listed below:

- 600 x 300 x 100mm Front mounted intercooler ( with all aftermarket piping)

- Bosch 040 high flow fuel pump

- Exedy Extra Heavy duty organic clutch ( 200km’s old)

- Monza BOV

- Greddy Manual Boost controller

- Cat-back exhaust

- KEI OFFICE adjustable front coilovers

- Tanabe rear struts with King Springs

- After market fuel rail

- Apexi Turbo timer

-

The car has had a mild tune for 14psi and runs very well.

The car had a fresh respray just before I bought it, and has a full kit with Advanti 17’’ rims. Interior is in very good condition. The car has an immobilizer and alarm system (Viper i think).

Only faults with the car are: Small crack on front bumper, rest of the kit is PERFECT. And needs a new speedometer drive, which I will be getting this week or next. And needs spacers on front, as tyre is hitting coil.

Car comes with registration until Feb 2010 but NO rwc, as a fulltime student I don’t have the time to organize it.

Feel free to contact me anytime for an inspection, on 0433 977 811.

PRICE: $10,500 without rims (but you will get 17’’ advanti rims instead). Or $11,500 with rims in pictures (9’’rears, and 8’’ fronts, unsure of offset.)

Feel free to contact me on: 0433 977 811, prefer phone contact as im not always on SAU

post-51127-1254130073_thumb.jpg

post-51127-1254131767_thumb.jpg

post-51127-1254131958_thumb.jpg

post-51127-1254132156_thumb.jpg

post-51127-1254132252_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/289831-immac-nissan-type-x-180sx-10500/
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...