Jump to content
SAU Community

Cruise 3rd Of October

dR34mRb25

By dR34mRb25,
in Events

 Share

Recommended Posts

dR34mRb25 Rookie

dR34mRb25

Posted
Posted

There will be a car cruise on saturday night the 3rd of october meeting at 8.30 2 grab something 2 eat. Leaving the meet point at 9.15. the meet point will be placed up on here sometime after 1am friday night for all of those who are interested. maps will b handed out. the cruise will take part through the hills spare tyres are recomended for this event aswell as some food n drink as there will b no shops after the first meet point.

more info uploaded friday night so keep an eye out on the forum saturday

Link to comment
https://www.sau.com.au/forums/topic/289992-cruise-3rd-of-october/
Share on other sites
dR34mRb25 Rookie

dR34mRb25

Posted
  • Author
Posted

hey guys saturday night is looking pretty good for us 2 do this cruise, just a note bring some warm clothes as it does get quite cold. cant tell u guys many details til first meet point, maps have been sorted out just working on the minor details now. anyone from north sorry 4 where it will b but u wont wana miss out, once again the details will b up saturday 4 anyone interested.

Cheers

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

      Mixing things up - installed some leather recaros to match the leather seat covered rear seats. Interior looks pretty schmick now except for some slight wear on the steering wheel which I will monitor and address if it becomes worse or actually noticeable!  
    • Predator1
      Tomei gasket

      By Predator1 · Posted

      Didnt realise RB's had more then 1 head.
    • MBS206
      Unpeeling the Orange

      By MBS206 · Posted

      I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • Kinkstaah
      Unpeeling the Orange

      By Kinkstaah · Posted

      The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
×
×
  • Create New...