Jump to content
SAU Community

Recommended Posts

OK I got some general maintenance done such as rocker cover gasket, timing belt, water pump etc, also radiator cleaned out.

Also added new 3" turbo back 'zaust, plus a POD filter.

That is it no other mods. It's a R33 GTST.

Now I drive it home with the widows down and thought it seemed hot but thought it was my imagination, also thought I smelled a bit of burning but dismissed it. I drove it tonight with the windows down and you can feel the heat from the foot well and fwd part of the central tunnel. Doesn't seem right. I wasn't boosting about and was driving fairly normal. Drove straight home and was worried about fire or something. I mean it feels REALLY hot.

Water temp gauge looks ok, but I notice quite a bit of activity from the oil pressure gauge; it's up and down quite a bit with the throttle. Always before it would seem to do very little, just show pressure in about the middle until the car was warmed up.

I'm thinking my engine should be a bit hotter 'cos I've probably gained 20 kw or so from the 'zaust but the heat has me worried. Can't call the shop 'till Monday so won't drive it until I check it with them.

Edited by Tony de Wonderful

Did they put the stock turbo heat shield back on?

When I got my brand new turbo back exhaust system, I felt something similar as well. Could feel excess heat when I'm stationary with windows down & I had a burnt smell as well.

If the pipes are new, the burnt smell is mostly normal. But when I 1st drove the car back that burnt smell scared the sh*t out of me as I thought my engine caught on fire & I pulled over like several times just to check the engine bay on my way home from the workshop.

After a while though, the smell gradually disappeared & I don't seem to be able to notice the heat anymore.

Edited by Mayuri Krab
Did they put the stock turbo heat shield back on?

When I got my brand new turbo back exhaust system, I felt something similar as well. Could feel excess heat when I'm stationary with windows down & I had a burnt smell.

After a while though, I don't seem to feel anything anymore though...

Good point. I'll ask them on Monday.

The oil pressure gauge has me worried though. I don't remember it bouncing around before.

You can check if the shield is on or not, just pop the bonnet & look for the turbo, if you can see it then the heat shield is not on. I would ask them for the old shield back & put it on, as it seem to block quite a bit of heat from the turbo coming upwards.

Also what are you seeing from your oil pressure? From what your description it seems to me like your gauge wasn't working correctly b4 & now it is...

As my oil pressure will move frequently with throttle once the engine has warmed up. Mine usually moves in the range of 2 to 6 (idle at 2 & goes up to 6 under heavy throttle).

only way to know for sure what is happening temp wise is to either get a proper temp gauge or borrow/buy a consult cable and hook it up to some software to read the exact temp. no point just guessing that it is hot if it turns out that the temp is actually fine.

edit: also you can pretty much ignore the stock water temp gauge. it will stay in the normal position up until a bit over 100 degrees when it will suddenly jump to hot.

i reckon the burning smell is normal.. new metal and exhaust putty and new gaskets etc.

and witht the guage maybe you didnt notice it before cos you wernt worried by the burning smell??

check the heat shield on the cat as well as the turbo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...