Jump to content
SAU Community

Recommended Posts

OK I got some general maintenance done such as rocker cover gasket, timing belt, water pump etc, also radiator cleaned out.

Also added new 3" turbo back 'zaust, plus a POD filter.

That is it no other mods. It's a R33 GTST.

Now I drive it home with the widows down and thought it seemed hot but thought it was my imagination, also thought I smelled a bit of burning but dismissed it. I drove it tonight with the windows down and you can feel the heat from the foot well and fwd part of the central tunnel. Doesn't seem right. I wasn't boosting about and was driving fairly normal. Drove straight home and was worried about fire or something. I mean it feels REALLY hot.

Water temp gauge looks ok, but I notice quite a bit of activity from the oil pressure gauge; it's up and down quite a bit with the throttle. Always before it would seem to do very little, just show pressure in about the middle until the car was warmed up.

I'm thinking my engine should be a bit hotter 'cos I've probably gained 20 kw or so from the 'zaust but the heat has me worried. Can't call the shop 'till Monday so won't drive it until I check it with them.

Edited by Tony de Wonderful

Did they put the stock turbo heat shield back on?

When I got my brand new turbo back exhaust system, I felt something similar as well. Could feel excess heat when I'm stationary with windows down & I had a burnt smell as well.

If the pipes are new, the burnt smell is mostly normal. But when I 1st drove the car back that burnt smell scared the sh*t out of me as I thought my engine caught on fire & I pulled over like several times just to check the engine bay on my way home from the workshop.

After a while though, the smell gradually disappeared & I don't seem to be able to notice the heat anymore.

Edited by Mayuri Krab
Did they put the stock turbo heat shield back on?

When I got my brand new turbo back exhaust system, I felt something similar as well. Could feel excess heat when I'm stationary with windows down & I had a burnt smell.

After a while though, I don't seem to feel anything anymore though...

Good point. I'll ask them on Monday.

The oil pressure gauge has me worried though. I don't remember it bouncing around before.

You can check if the shield is on or not, just pop the bonnet & look for the turbo, if you can see it then the heat shield is not on. I would ask them for the old shield back & put it on, as it seem to block quite a bit of heat from the turbo coming upwards.

Also what are you seeing from your oil pressure? From what your description it seems to me like your gauge wasn't working correctly b4 & now it is...

As my oil pressure will move frequently with throttle once the engine has warmed up. Mine usually moves in the range of 2 to 6 (idle at 2 & goes up to 6 under heavy throttle).

only way to know for sure what is happening temp wise is to either get a proper temp gauge or borrow/buy a consult cable and hook it up to some software to read the exact temp. no point just guessing that it is hot if it turns out that the temp is actually fine.

edit: also you can pretty much ignore the stock water temp gauge. it will stay in the normal position up until a bit over 100 degrees when it will suddenly jump to hot.

i reckon the burning smell is normal.. new metal and exhaust putty and new gaskets etc.

and witht the guage maybe you didnt notice it before cos you wernt worried by the burning smell??

check the heat shield on the cat as well as the turbo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...