Jump to content
SAU Community

Rb25/30de

Line 3

By Line 3,
in Engines & Forced Induction

 Share

Recommended Posts

central coast person Proficient

central coast person

Posted
Posted

its been done so much. My mate wants my spare rb25 parts to do it at the moment. Its alright but there is one problem where the oil galleries clog up easily. They line up fine but the drift r31 has gone through 2 engines because of this. I am thinking about doing a huge right up and attaching what is already in one of the sticky's about how to get N\A performance. Have a look at it because it covers a lot about he rb25\30 conversion. Your going to have to study what parts to use because i know r31 conrods can not go over 6500rpm or the will crack....

To be honest i just did a 2.7L bore and hone :banana: worked well with a full recondition.

Link to comment
https://www.sau.com.au/forums/topic/291725-rb2530de/#findComment-4876622
Share on other sites
Nigel Nichols Explorer

Nigel Nichols

Posted
Posted (edited)
More torque but I think it lowers the compression slightly? I'm not entirely sure.

Definitely more torque as N-DAWG has said. However use the pistons out of the RB25 and it lifts the compression to 10:1.

For my RB30DE I used the R33 RB25 head and kept the VCT. (you can use the R32 RB25 non vct head if you like. Its easier but the intake ports are slightly smaller so "may" not perform quite as well)

My R32 only had a RB20DE so the difference in grunt with the RB30DE is substanial.

And this is all on std R33 RB25 ECU, std cams, RB20DE exhaust, RB20DET throttle body and RB25 injectors. RB20DE fuel pump.

Only non factory part used is custom front facing plenum and air cleaner

No go fast bits at all so if you want to put more dosh into it there plenty more to be had before a turbo is required.

Nigel

Edited by Nigel Nichols
Link to comment
https://www.sau.com.au/forums/topic/291725-rb2530de/#findComment-4876985
Share on other sites
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
    • MBS206
      NC MX5

      By MBS206 · Posted

      I hear that would involve some nice country road drives into the hills for Mark...
    • MBS206
      Recommendation for engine oil funnel spill free

      By MBS206 · Posted

      I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • EndZee
      Fuel Pump Control Module & Dropping Resistor

      By EndZee · Posted

      Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • Duncan
      M35 Brake caliper replacement

      By Duncan · Posted

      You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
×
×
  • Create New...