Jump to content
SAU Community

Stock Bits Off An S2 R33 + Hks Pod, Boost Tee.


Recommended Posts

All stock items have come off a series2 r33. They are all in good working condition and are for sale only due to major upgrades to the car.

Items are pick up only located in Jamboree Heights, Brisbane. I am open to offers but don't waste my time as I am in no rush to sell any of the items.

Standard coilpacks $150

Standard injectors $150

ECU from a manual s2 r33 $125

Standard AFM - pink lable $100

HKS Podfilter $90

Turbosmart boost tee $10

I will also soon have up for sale the standard turbo with exhaust manifold and dump pipe, the workshop it was at accidently forgot to leave the manifold in my car when I got it back. So watch this space...

Contact Tom, 0412 695 225. Preferably via SMS as during the better part of the day I cannot answer my phone.

  • 3 weeks later...

Prices dropped

Standard coilpacks $150 125

Standard injectors $150 125

ECU from a manual s2 r33 $125 100

Standard AFM - pink lable $100 80

HKS Podfilter $90 60

Turbosmart boost tee $10

  • 2 weeks later...
I will also soon have up for sale the standard turbo with exhaust manifold and dump pipe, the workshop it was at accidently forgot to leave the manifold in my car when I got it back.

so how much will the turbo cost when u get it back? only after the rb25 turbo to upgrade my rb20 one

thanks!

I'll sell the turbo now for $250ono with lines without the manifold and dump. When I eventually end up going to pick them up if the turbo hasnt sold seperatly the whole thing manifold+turbo+dump I'll be chasing 450 for.

  • 3 weeks later...
  • 2 months later...


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...