Jump to content
SAU Community

Recommended Posts

This is the updated version of the famous VQ30DET. This is not the same as the 300ZX VG30DETT.

Its basically a VQ30DE out of the V35 skyline, with oil squirters, lower compression and a turbo thats very similar to an R34 GTT turbine. Quoted at 206kw and strong as hell these engines are perfect for a drift set-up or a perfect candidate for engine transplant into a skyline or Silvia.

I was driving my Y34 cedric with this engine for a few weeks until the transmission blew up, so I garantee the engine is in great condition. It comes complete with loom and ECU, but NOT including a transmission.

It also comes with the Y34 subframe including steering rack and suspension, so you might even be able to make that fit.

Contact Ben on 0417 366 372 or email me at [email protected]

post-50241-1255560064_thumb.jpg

post-50241-1255560071_thumb.jpg

post-50241-1255560077_thumb.jpg

post-50241-1255560084_thumb.jpg

some specs on the engine pulled from here => R34 VQ30DETT Conversion

VQ30DET

Manufacturer: Nissan

Type :

V-6 DOHC

24 valves total

4 valves per cylinder

Bore × stroke

93.00mm × 73.30mm

3.66 in × 2.89 in

Bore/Stroke ratio 1.27

Displacement

2987 cc

(182.278 cu in)

Unitary capacity 497.83 cc/cylinder

Compression ratio 9.00:1

Fuel system EFi

Aspiration Turbo

Intercooled

Max. output

(JIS) 269.7 PS (266.0 bhp) (198.4 kW)

@6000 rpm

Max. torque

(JIS) 368.0 Nm (271 lbft) (37.5 kgm)

@3600 rpm

Specific output

89.1 bhp/litre

1.46 bhp/cu in

Specific torque

123.2 Nm/litre

  • 2 weeks later...
  • 1 month later...
  • 1 month later...
  • 1 month later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...