Jump to content
SAU Community

Datalogit File

Sydneyactionman
 Share

Recommended Posts

paulr33 Grand Master

paulr33

Posted
Posted

im confused, and i think you are as well.

the PFC will have an existing tune on it which you can erase by the hand controller or by datalogit

ETC, DATA INIT, YES, Reboot Car, Default maps are now loaded

or

plug in datalogit, Read All, Save the file to your PC in case you need it and then Menu, Initialise, reboot car, default maps now loaded

either of these will get the car working and drivable to a tuner

remember if you data init / initialise (either way) to perform self idle adjustment before driving the car (covered in the PFC FAQ)

also be sure to note if car has aftermarket AFMs, map sensors or injectors to note down their settings before DATA INIT / Initialise

Link to comment
https://www.sau.com.au/forums/topic/292325-datalogit-file/#findComment-4885241
Share on other sites
JonnoHR31 Grand Master

JonnoHR31

Posted
Posted

hijacking it up but has any ever had any trouble copying datalogit map and log files. i've been using a vista laptop and the only way i can open the files outside datalogit is to use the datalogit open screen and create a shortcut on the desktop, cant copy them like this tho. using windows explorer the files simply arent there. have checked and they're not hidden. any gay protection setting in datalogit?

Link to comment
https://www.sau.com.au/forums/topic/292325-datalogit-file/#findComment-4886614
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Yeah in that case, pulling the dent out. Event a very slight dent can create a lot of work filler-wise and there is a strong chance the panel won't be the factory shape when you are done (as the dent will result in a new high point created somewhere, then everything is brought up to that new high point... but the panel shouldn't be that high if that makes sense).  So you've filled and primed the panel and it is flat, why would you go back and remove the primer and add more filler? 
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      Something else I have been faffing with while the car was off the road is making the AC work. Assuming the car isn't at a thermal limit the idea of having AC while waiting in line to go on track sounds delightful. I have actually been lugging around the weight of the entire system since 2018 when the RB25NEO went in without it working at all.  The main reason was in the first few events before I got around to re-gassing it the rubber hose that runs under the manifold had the factory heat wrap/sleeve fail resulting in this: ~2 years ago I purchased a complete used R32 AC line set but when I finally went to install it the line i needed was different where the expansion section is I found a local place that was able to replace the rubber section and re-crimp. They also added some modern heat sleeve to the hose Tight fit but fingers crossed this is the last physical piece of the puzzle needed
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      the top black section is bonded to the silver section with some form of rubber. I assume to isolated NVH from the box
    • GTSBoy
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By GTSBoy · Posted

      Plan B? Get someone to machine up a metal bush/collar/whatever it needs to be to replace the rubber? I haven't had a close look at that part recently to have a proper feel for whether that's possible. But it might be easy.
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      I do not want to install a short shifter and the only other stock throw shifter I have seen is the Nismo "Rigid shifter" for $290 So plan A is to fill it with sikaflex to stiffen it up and hope for the best
×
×
  • Create New...