Jump to content
SAU Community

Recommended Posts

Up for grabs is a nicely modded 1997 Nissan RS-Four V Stagea. I am the first owner of this car in Australia and has been a pleasure to own but needs to go to make way for a new car!

Car has always been serviced every 5,000kms with a fully synthetic oil, run on 98 octane, and has only been boosted to 11psi which it made a safe 129.4awkw (can provide dyno sheet) with a slipping auto and been told it has heaps more in it but needs a copgy back ecu to get it to close to 200awkw on the standard turbo.

Since then car has had nearly 3k spent on the transmission which was rebuilt with Kevlar bands, heavy duty clutches, valve body modified for more solid shifts and stall flushed which was done by GZM Automotive. Also replaced the rear tyre's less than 6 months ago, replaced the alternator and installed 6" Apline Type S splits.

Spec's are:

RB25DET

94,000kms

All Wheel Drive

Reg to mid next year (June 2010)

FMIC

Spitfire Coil Packs

Turbotech Boost Controoler

Apexi Air Intake

HKS Boot Guage

3" Exhuast from the turbo back

Rebuilt Auto

18" Blitz Type 03 Wheels

Blitz Engine & Trans Coolers with Braided Lines

7" Double Din DVD Player with MP3/USB/Bluetooth

Freeway Dolphin/Nismo bodykit

Alpine Type S 6" Speakers

Twin Sunroofs

Nismo Clear Indicators

Con's:

Font bumper has a few crack's but can be easily replaced from between $400-$600 if your really picky from various body kit specialists (can provide quotes)

09062008053.jpg

09062008055.jpg

IMG_0033.jpg

PIC_1275.jpg

PIC_1279.jpg

PIC_1280.jpg

PIC_1281.jpg

Please contact me on 0412 876 885 with any inquires

Edited by SHIZNT
Link to comment
https://www.sau.com.au/forums/topic/292343-fsvic-nissan-stagea-rs-four-v-11000/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
×
×
  • Create New...