Jump to content
SAU Community

Work Rezax 17x8 & 17x9 3 Piece Multistud!

CEF11E
 Share

Recommended Posts

CEF11E Veteran

CEF11E

Posted
Posted

I have bought some new wheels so these are up for sale.

I have had them for 3 years and had them powdercoated a year ago.

fronts 17x8 +42

rears 17x9 +42

they will fit bots 4 and 5 stud cars.

I bought these as I wanted tough wheels that were 4 stud.

Since then I bought GTR brakes and they did not clear the new callipers so I bought a set of 4x114.3 spacers in 25mm.

Ever since I put the spacers on they have been out of balance and I dont want to go back to non turbo brakes with a 300rwkw car so I have decided to just buy wheels with the correct offset.

without spacers they will not clear 4 spot callipers but I will provide spacers if needed. I have 2 sets in different sizes. both with special nuts.

They are hugely tough wheels with good dish and I dont want to sell them but have just bought lmgt4's

P1000491.jpg

P1000498.jpg

P1000502.jpg

P1000502.jpg

becuase of the spacer conundrem I am selling them cheap cheap cheap!!!

$700!

they are pretty mint. there is no gutter rash and only a few small scratches in the paint.

CEF11E Veteran

CEF11E

Posted
  • Author
Posted

sorry, I forgot some vital details...

LOCATION: MELBOURNE - but will courier for buyer

STUD PATTERN: 5x114.3 & 4x114.3

pics above are with 296mm GTR front brakes and 25mm spacers installed on the front.

cheers!

CEF11E Veteran

CEF11E

Posted
  • Author
Posted

Hi Jason, the rims do not come with tyres unless you are local and them I can include a set of fedral 595ss 235/45/17 with 50% or more tread for $50.

the reason for this is the rims will be packed properly in rim boxes to be sent. and they would cost a fortune to ship with tyres. shipping without tyres would be around $125 to syd. shipping with tyres i have no idea.

CEF11E Veteran

CEF11E

Posted
  • Author
Posted

I have had a lot of intrest but mostly for rims with tyres.

if you are local you can have 4 fedral 595ss that are roadworthy for free if you buy the rims. they will need to be fitted.

dropping the price of the rims to $600 otherwise they will go on my R31 daily :happy:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      RB25DE NEO with Haltech ECU

      By MBS206 · Posted

      You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • sonicii
      Could it really happen......

      By sonicii · Posted

      I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • MBS206
      Could it really happen......

      By MBS206 · Posted

      Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...