Jump to content
SAU Community

Rb26 Block, Sump, Baffles, Etc... Bottom End

sebastion
 Share

Recommended Posts

sebastion Proficient

sebastion

Posted
Posted

hey guys, have a r32 gtr rb26 block, which was previously bored out to 87mm and somehow the people that did the job left scoring in the bores... not sure if it would be as simple as a hone and replace the pistons (havn't really looked at it properly)... has new welch plugs, and overall in good condition, would guess it would only suit being sleeved, or risking the larger bore pistons... also has cradle to match... chasing $500

r32 gtr sump and diff, great condition... $450

rb26 baffle plates (the ones that bolt to the cradle) ... good condition $80

rb26 standard harmonic balancer good condition ... $80

rb26 standard rods, great condition, have 12 ... $150 for 6

r32 gtr crankshaft, (the early one with the short oil drive, also has some scoring on 1 rod journal) ... $100

rb26 crank, unsure what model it is, will take the oil pump off and have a look ... $depends

rb26 standard pistons and rings, reasonable condition, handy for some spares... $50

r32 gtr engine mounts, the metal brackets which bolt up to the block and the mounts... $100

located on the far north coast NSW, we will combine items at a lower price too. can deliver personally as far as brisbane qld, at a little extra cost... cheers ... pics will be posted up here upon genuine intrest requests...

please pm us if you are interested...

sebastion Proficient

sebastion

Posted
  • Author
Posted

UPDATE AND REVISED PRICES...

hey guys, we have most bottom end parts available, all in good condition. block has some serious scoring in 3 cylinders, the other three are perfect... its at 87mm bore, would suit being sleeved, and possibly risking a larger bore (its been done)... its from a early model r32 gtr, so supposedly the tougher 05U block, will come as seen in pictures, with all oil squirters in new condition (only replaced a few thousand K's ago), as with the welch plugs... all journals are in top condition too.... and will come with the cradle that match's the block, ... chasing $500 for the block

post-56395-12561743833347_thumb.jpgpost-56395-12561744305443_thumb.jpgpost-56395-12561746141149_thumb.jpgpost-56395-12561746466433_thumb.jpgpost-56395-12561746781877_thumb.jpgpost-56395-12561747487653_thumb.jpgpost-56395-12561748159392_thumb.jpgpost-56395-12561748682554_thumb.jpgpost-56395-12561749258883_thumb.jpgpost-56395-12561753398481_thumb.jpg

R32 GTR rb26 crankshaft (in great condition, no marks on any of the bearing surfaces), it is the one with the shorter oil drive though (easily fixed with a aftermarket collar-$100) chasing $400

post-56395-12561750119618_thumb.jpgpost-56395-12561750619107_thumb.jpgpost-56395-12561751406003_thumb.jpgpost-56395-12561751760837_thumb.jpg

R32 GTR rb26 crankshaft, same model as above (great condition apart from the one rod journal, easily machined, which has slight scoring on it) chasing $200

post-56395-12561757491241_thumb.jpgpost-56395-12561757778797_thumb.jpgpost-56395-12561758192935_thumb.jpgpost-56395-12561758609798_thumb.jpgpost-56395-12561758844734_thumb.jpg

R32 GTR rb26 standard rods, great condition and nearly the best standard rods in the world... $150 for 6 (have 2 sets)

post-56395-12561756968037_thumb.jpg

R32 GTR rb26 standard pistons (86mm) average condition, pitting in the quench area's $50

Rb26 87mm pistons (not sure of brand) 3 are great, 3 are crap... $150 (pic shows the 3 good ones, with the standard rods)

post-56395-12561754095143_thumb.jpg

R32 GTR standard harmonic balancer (great condition) $100

post-56395-12561749777768_thumb.jpg

RB26 tension and idler pulleys (only a few thousand k's old) still spin very freely ... $120

post-56395-12561752167279_thumb.jpg

Rb26 knock sensor and plug, (have misplaced the other so only the one for now...) $70

post-56395-12561753016065_thumb.jpg

RB26 engine oil baffle plates (good condition) $80

post-56395-12561753750618_thumb.jpg

Rb26 sump, great condition, with baffle and diff... $550

post-56395-12561760259828_thumb.jpgpost-56395-12561760997899_thumb.jpg

  • 3 weeks later...
sebastion Proficient

sebastion

Posted
  • Author
Posted

bump, found the other knock sensor... have all other engine accessories... please let us know if there is anything you are after?

cheers

  • 3 weeks later...
  • 3 weeks later...
sebastion Proficient

sebastion

Posted
  • Author
Posted

hey guys, need to move some gear out... taking offers, if you have anything aftermarket for an r32 gtr (engine, interior anything), we can organise something... cheers

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • GTSBoy
      Valve clearance for RB25det series 2

      By GTSBoy · Posted

      This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Kinkstaah
      Valve clearance for RB25det series 2

      By Kinkstaah · Posted

      Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
    • soviet_merlin
      Valve clearance for RB25det series 2

      By soviet_merlin · Posted

      To be fair it's the other way around. 300kw is boring in a modern Golf or BMW. They are so competent / well-engineered / devoid of emotion that you have to go stupid fast to feel anything. Whereas the <300kw RB still makes all the right noises and it feels good to drive. Can pull off at the lights with the turbo whooshing and the blow-off pssshing and feel like the coolest kid on the block. Just don't look to the side where you'll see the bored housewifes in their shitbox Yaris/Corolla/Camry that kept up because you didn't go fast at all
    • Dose Pipe Sutututu
      Valve clearance for RB25det series 2

      By Dose Pipe Sutututu · Posted

      300kW is so boring in a Skyline, you'll get spanked by someone's mum's Golf with Alibaba pipes, and an email tune.
×
×
  • Create New...