Jump to content
SAU Community

Recommended Posts

hey guys, have a r32 gtr rb26 block, which was previously bored out to 87mm and somehow the people that did the job left scoring in the bores... not sure if it would be as simple as a hone and replace the pistons (havn't really looked at it properly)... has new welch plugs, and overall in good condition, would guess it would only suit being sleeved, or risking the larger bore pistons... also has cradle to match... chasing $500

r32 gtr sump and diff, great condition... $450

rb26 baffle plates (the ones that bolt to the cradle) ... good condition $80

rb26 standard harmonic balancer good condition ... $80

rb26 standard rods, great condition, have 12 ... $150 for 6

r32 gtr crankshaft, (the early one with the short oil drive, also has some scoring on 1 rod journal) ... $100

rb26 crank, unsure what model it is, will take the oil pump off and have a look ... $depends

rb26 standard pistons and rings, reasonable condition, handy for some spares... $50

r32 gtr engine mounts, the metal brackets which bolt up to the block and the mounts... $100

located on the far north coast NSW, we will combine items at a lower price too. can deliver personally as far as brisbane qld, at a little extra cost... cheers ... pics will be posted up here upon genuine intrest requests...

please pm us if you are interested...

UPDATE AND REVISED PRICES...

hey guys, we have most bottom end parts available, all in good condition. block has some serious scoring in 3 cylinders, the other three are perfect... its at 87mm bore, would suit being sleeved, and possibly risking a larger bore (its been done)... its from a early model r32 gtr, so supposedly the tougher 05U block, will come as seen in pictures, with all oil squirters in new condition (only replaced a few thousand K's ago), as with the welch plugs... all journals are in top condition too.... and will come with the cradle that match's the block, ... chasing $500 for the block

post-56395-12561743833347_thumb.jpgpost-56395-12561744305443_thumb.jpgpost-56395-12561746141149_thumb.jpgpost-56395-12561746466433_thumb.jpgpost-56395-12561746781877_thumb.jpgpost-56395-12561747487653_thumb.jpgpost-56395-12561748159392_thumb.jpgpost-56395-12561748682554_thumb.jpgpost-56395-12561749258883_thumb.jpgpost-56395-12561753398481_thumb.jpg

R32 GTR rb26 crankshaft (in great condition, no marks on any of the bearing surfaces), it is the one with the shorter oil drive though (easily fixed with a aftermarket collar-$100) chasing $400

post-56395-12561750119618_thumb.jpgpost-56395-12561750619107_thumb.jpgpost-56395-12561751406003_thumb.jpgpost-56395-12561751760837_thumb.jpg

R32 GTR rb26 crankshaft, same model as above (great condition apart from the one rod journal, easily machined, which has slight scoring on it) chasing $200

post-56395-12561757491241_thumb.jpgpost-56395-12561757778797_thumb.jpgpost-56395-12561758192935_thumb.jpgpost-56395-12561758609798_thumb.jpgpost-56395-12561758844734_thumb.jpg

R32 GTR rb26 standard rods, great condition and nearly the best standard rods in the world... $150 for 6 (have 2 sets)

post-56395-12561756968037_thumb.jpg

R32 GTR rb26 standard pistons (86mm) average condition, pitting in the quench area's $50

Rb26 87mm pistons (not sure of brand) 3 are great, 3 are crap... $150 (pic shows the 3 good ones, with the standard rods)

post-56395-12561754095143_thumb.jpg

R32 GTR standard harmonic balancer (great condition) $100

post-56395-12561749777768_thumb.jpg

RB26 tension and idler pulleys (only a few thousand k's old) still spin very freely ... $120

post-56395-12561752167279_thumb.jpg

Rb26 knock sensor and plug, (have misplaced the other so only the one for now...) $70

post-56395-12561753016065_thumb.jpg

RB26 engine oil baffle plates (good condition) $80

post-56395-12561753750618_thumb.jpg

Rb26 sump, great condition, with baffle and diff... $550

post-56395-12561760259828_thumb.jpgpost-56395-12561760997899_thumb.jpg

  • 3 weeks later...

bump, found the other knock sensor... have all other engine accessories... please let us know if there is anything you are after?

cheers

  • 3 weeks later...
  • 3 weeks later...

hey guys, need to move some gear out... taking offers, if you have anything aftermarket for an r32 gtr (engine, interior anything), we can organise something... cheers

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...