Jump to content
SAU Community

Recommended Posts

Pity SPEED died, was a decent read :bunny: Zoom is getting too repetitve now, I used to buy every issue, but now it's just 13B's in little mazda's and datto's. Get's boring after a while :)

Yeah SPEED I had issue 1 to about 5 and was given #15.

I can't remember why they got axed...

Zoom (Fully blown, outrages mods), Hot 4's (Riced up shit), half the time its all the same shit, but Zoom has some very good and interesting articles tho.

For example, Zoom had segments on comparing Front Mount Intercoolers, how a NOS System is set up and differences in Boost Controllers... Just to name a few.

HPi is still number 1 for me, direct from Japan and they have segment on cars that are in AUS as well.

Magazine articles are written to sell magazines. Wheels is specifically targeted to 'Aussie' enthusiasts and will therefore have an article on a Holden or Ford in every magazine. Bang for buck the HSV & FPV vehicles are pretty good and are the top of the tree for Australian built performance cars, thus they are compared to other performance cars from around the world. Motor magazine is aimed at the slightly wealthier enthusiasts and contains more articles about European vehicles. HPI & Zoom magazine articles seem to list the mods a person has done to the car and the build process. They rarely seem to actually be a review of the car or a driving story. Like others have commented it was a pity that SPEED only lasted for about 8 issues as it was a good blend of articles.

When sorting out which cars to compare sometimes they do it on price point, performance numbers (kW, engine types, capacity, 0-100 times etc), sometimes they do it because they were the only cars the magazine was able to borrow from dealerships and private owners, sometimes they do it purely because it hasn't been done before. At least both Wheels and Motor have finally realised in the last few years that kW at the flywheel and kW at the wheels are different numbers and that a cheaper car with some well planned mods can be better than more expensive standard cars. But ultimately the articles are written to sell magazines - so in Australian publications they will invariably contain an Australian car. If you don't like it buy Car or EVO magazines from the UK, or just look up their websites and read the smaller articles for free.

I read magazines from the USA, UK and various Australia publications. However I go to my local library and borrow them so they cost me nothing and I only read the bits that I am interested in.

Well said, as you pretty much narrowed it down to the target audience.

I have bought Wheels Mag in the past, but every issue was HSV vs FPV, even now when I go look at whats new on the magazine stand, it's always some HSV vs FPV top of the range and every so often they would make it a HSV vs FPV vs EVO X or 370Z or STi or an Exotic Euro.

As long as HSV and FPV are on the front cover, I guess their doing their job... Call me bias as I am Skyline enthusiast, still HPi has had GTR / Silvia Specials, segments on Supra, Soarer, Z, RX 7, EVO, STi, NSX, even a Ford Mustang was in HPi one time :)

IMO there is a bit more variety, mainly with the JDM cars.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Wanted to add some of my R33 GTST  R34 GTR wheels, 18x9 ET30 with 255/35/R18 PS4S'   BBS RE-V7 029 18x9.5 ET22 with 255/35/R18 PS4S' Needs a bit of camber   
    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...