Jump to content
SAU Community

Recommended Posts

R34 GTR rims 18x9 +30 and Toyo 245/40/18 tyres. Cost $1200 alone.

The rims are in very good condition with no gutter rash. They are 10 years old and have some very minor marks.

The toyo's have only done 2500-3000k's and are approx 95%. Prefer to sell them with the rims as my new rims are 19's and no use to me. Plus it will cost me to remove them.

Located in Brisbane and happy to ship at buyer expense.

The rims will come with 1 spare centre cap incase you loose one.

Will post better close up pic's of rims once they have been cleaned on the week end.

Rims $2200

Tyres $700

Package together $2700

post-14923-1256509798_thumb.jpg

post-14923-1256509812_thumb.jpg

post-14923-1256509829_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/293533-34gtr-18x9-30-rims-and-toyo-tyres/
Share on other sites

Quiet possibly Australia's hotest looking stag IMO.... got a 26 in it to :banana:

Free bump!

Unfortunitly no Rb26. Save that last mod when the Rb25 blows

New wheels should be here next week. Need these sold.

Did you have these rims on with the stagea front still? If so what was the fitment like? And how was the rear fitment, did you have to roll the gaurds or space out the wheel or anything like that?

Did you have these rims on with the stagea front still? If so what was the fitment like? And how was the rear fitment, did you have to roll the gaurds or space out the wheel or anything like that?

The rears straight bolt on, no rubbing or guard rolling needed. Note car currently has a auto rear cradle at the moment. Manual cradle is 50mm narrower soon to go in.

The fronts have 25mm spacers to fill the gtr guards. Only had the r34 wheels on for a one day with the standard stagea front about 3 years ago. No pics, but there are plently around to check out the fitment.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...