Jump to content
SAU Community

Recommended Posts

hey guys and girls , more looking for swaps or 14k .

Vt ss series 2

Gen 3 6 speed

255 rwkw. ( cold air, zorst, TB,injectors, tune, )

new xtreme HD clutch

3.5" stainless system

bosch 040 fuel pump

new water pump

new radiator

SSSl king springs ( new shocks)

20" Ve Super sport wheels

2.5tonne towbar!.

HSV coulsen interior ( Pricey)

132,000 kms

Small scrape on rear left guard ( hardly noticable)

swaps mainly for a neat r34 4 door turbo auto. or a MINT 32 with 25 conversion ect. ( or 20 depeoding on car )

pm me !

more pics avalable on request. via PM.

post-60639-1256684676_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/293873-vt-ss-series-2-6-speed-on-20s-swaps/
Share on other sites

as above mate,

there would need to be cash adjustment,

i sold my 33 with 280 rwkw and heaps of fruit for 13k...

there are plenty on car sales with low kms and more mods for around 10,

so i would want minimum 3500 adjustment,

cheers

swap all this

R33- it has 97000k on the clock, auto, factory turbo, big front mount intercooler, blitz blow off valve, hks turbo timer, pwr mirrors and windows, central locking, set of 17's that are on it in the photo with ok tyres and a set of stock nissan 16 inch with not so good tyres, clean interior, little tear in driver seat, front bar and left guard are white and the rear left quarter has a ding in it but i don't know how it got there because i bought it like that. and i have some new paint mixed up to respray the front. its regoed untill jan. 2010.

VL CALAIS- disc to disc lsd with 4:11 gears, auto, stock RB30 just needs a dizzy but i think i have a couple of spare ones,custom seats but front driver seat is ripped, good grey velour calais door trims and hood lining just needs to be put back in properly, complianced factory turbo, and for race seats and cage i think, 1 or 2 of the wheels in the pic are cracked from my mates brother taking his stateo up the gutter. and some low life stole the nose cone out of my mums garage so it would need that and a new sunroof because someone broke the old 1

VL COMMODORE- all brand new bushes+ pwr steering rack and pump+ adjustable panhard rod+ super low king springs+ gt gas shockies+ wheel bearings+ slotted front rotors+ new unis+ the 5 spd has been rebuilt+ the engine has been fully rebuilt done f**k all k's, it was bored to a RB31(3.1 litre) with a vl turbo crank, forged ACL race pistons and rods, ported and polished head with heavy duty valves and double coil valve springs. put a metal head gasket on it and it will handle a turbo and or nos all day long. i tapped a truck and rippled the nose cone and front guard so i was goin to put everything in the calais. i took the dash out and the pedal assembly and put it into the calais and that was as far as i got

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...