Jump to content
SAU Community

Recommended Posts

i need to get rid of these asap!

r34 gtt factory spoiler in black - $150

r34 gtt factory catback exhaust with gutted cat and twin pipes at the back - $80

r34 gtt factory suspension (no springs) and one of the rears has a leak - $50

r34 rear coilovers height adjustable leaking/need rebuild brand is "deed" - $50

r34 rb25 actuator - $50

r33 gtst factory side mount cooler with pipes - $50

r33 gtst clutch brand is nkk it is near new - $100

r33 gtst manual tailshaft - $100

r33 gtst flywheel - $100

r32 rb26 actuator - $50

r32/s13 3" diffback exhaust with s/steel cannon - $50

random front mount cooler core 760mm x200mm x70mm - $50

pair of bolt on spacers 20mm 5 stud 114.3 missing 7 studs but come with all 10 nuts - $50

located in melbourne

pics up soon

thanks

Link to comment
https://www.sau.com.au/forums/topic/294354-r3433-stuff/
Share on other sites

Champ do u have the tops for the suspension sitting round anyway? Bracket assembly / spacer / bushing rubber etc: the shit that you use to hold the springs on to the shocks. I'm just hunting the top assembly gear for two front shocks :down:

Link to comment
https://www.sau.com.au/forums/topic/294354-r3433-stuff/#findComment-4911316
Share on other sites

forgot to add ive also got a random bucket seat, red in colour with black trim and its new/never used - $50

Champ do u have the tops for the suspension sitting round anyway? Bracket assembly / spacer / bushing rubber etc: the shit that you use to hold the springs on to the shocks. I'm just hunting the top assembly gear for two front shocks :D

yeah mate but i'd like to sell them with the suspension

can i have the pict of cooler core?

thanks.

post-31699-1257072228_thumb.jpg

did u have any r33 s2 castor rods? good luck with yr sale

nope :stupid:

and thanks

Interested in R34 standard suspension, how bad is leak and can these sort of leaks normally be repaired?

i havent had a proper look i just noticed that it was covered in oil when i took em out. pretty sure its repairable

Link to comment
https://www.sau.com.au/forums/topic/294354-r3433-stuff/#findComment-4912333
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...