Jump to content
SAU Community

R32 Owners Club

BANGN

By BANGN,
in R Series (R30, R31, R32, R33, R34)

 Share

Recommended Posts

R31Nismoid Grand Master

R31Nismoid

Posted
Posted
BTW Terry, you don't see muscle car clubs dwindling in numbers, in fact they import more and more of them!

Same goes for hot rod clubs - every meet they have here seems to be growing in numbers!

Yes but hotrods and cheap turbo imports do not have the same demographic of owners.

I can tell you for a fact that 80% of people in Vic only own their skyline from 3 years or less.

This is going directly off the Vic club records. Most people sell their skyline and move on within a 3year period.

bozodos Grand Master

bozodos

Posted
Posted

the other thing is that there is a lot of niche clubs - in Mildura in the past month alone we have seen meets for the Eureka Club (Pretty sure it was around 700 made total!) and a some 30's model Citroen Club!

I think it could be a workable idea, though it would be kind of different to the R31 club in that there was no mass produced Aussie version of the R32. But then what about a GT-R club, or an 80's Import Club, or an R33 Club etc lol. I am sceptical that this would actually get off the ground, but it would be cool :)

  • 2 weeks later...
tricky_dan Enthusiast

tricky_dan

Posted
Posted

heck yes im up for this! and although skyline owners apparently only keep their cars for 3 years on average i predict this site to do well, since its about cheap turbo imports, which young people own and young people love the internet lol~

  • 5 months later...
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      ECU sees many times the speed than speedo does (R34 swap)

      By Kapr · Posted

      Hi. This is just my curiosity because iam sure the tuner figure something out...but either way i want to ask. The "problem" is that the Nistune ECU (Stagea FW and RB25DET NEO from Stagea) sees many times the speed than the speedo does(he says the speedo show 120 km/h - correct speed and the ECU shows like 510km/h ) I told him that this car/tranny getting speed from rear diff. If iam not mistaken the RB25DET NEO "need" to see tranny speed sensor? (my tranny has the plug for it). So couple of "question" If he connects/wire the speed sensor to the tranny...are the signals gonna intervene and if...what if he disconnects the rear diff one and the speedo stops working? Or the "new" sensor from the tranny "take over" and will not going need the one from diff? As i said i know he figure/get that done...iam just curious to know what are the solutions 🙂 
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Your IACV is set to idle too low. You need to adjust it via the screw Duncan mentioned. From memory it should be 650rpm with the valve electrics unplugged. What is it trying to idle at with the IACV plugged in?
    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • albyz34gt
      34 de+t conversion using s2 stagea automatic transmission, engine harness and ecu

      By albyz34gt · Posted

      Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Duncan
      R32 GTS (RB20DE) Injectors Replacement

      By Duncan · Posted

      Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
×
×
  • Create New...