Jump to content
SAU Community

Recommended Posts

ok just incase people are interested, on the extreme clutch website it lists the wgnc34, r34 gtt, r34 gts and the r34 gtr as KNI25003 but on the exedy website it lists r34 gtt and r34 gts as NSK-7333 and r34 gtr as NSK-7172, they dont have a listing for the stagea. im unsure why extreme list all 4 as the same when exedy says that the r34 gtr is diffrent. i also went down to my local clutch place and they rang their supplier and have come back with the stagea is the same as the r31/32/33 gts which is NSK-7056, the prices they gave me are $368 for a standard (NSK-7056) $519 for a heavy duty (NSK-7056HD) and $775 for a heavy duty cushion button (NSK-7056HDCB).

the only thing that is bothering me is that the r13/32/33 clutch is a 240mm and the others are a 250mm. can anyone shed some light on this??

R31-R32-R33 series 1 all had push type clutch.

My RS four S has pull type clutch same as R33 series 2 or R34.

Gtr clutch would be heavy duty as torque is much higher.

It is a pull type on the RS4S.

AFAIK the R33 s2 clutch is also a push.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...