Jump to content
SAU Community

Recommended Posts

just put on DMS 50mm on my 34gtr. its really nice coilover and i can go corner much better. my setting is

damp:F and R soft to hard 2 turn repound: haven't touch it yet.

only one thing make me unhappy. it make some noise, when the road is flat, the noise like birdcall (zi zi zi zi) not loud i can't notice it if I open the window or music on. but if the road is not flat. it make some knock, all the noise come from rear (I have cut the rear trim for easy adjust rear suspension).

anyone can give some idea??? is that normal??

Link to comment
https://www.sau.com.au/forums/topic/295582-dms-50mm-coilover-make-some-noise/
Share on other sites

just put on DMS 50mm on my 34gtr. its really nice coilover and i can go corner much better. my setting is

damp:F and R soft to hard 2 turn repound: haven't touch it yet.

only one thing make me unhappy. it make some noise, when the road is flat, the noise like birdcall (zi zi zi zi) not loud i can't notice it if I open the window or music on. but if the road is not flat. it make some knock, all the noise come from rear (I have cut the rear trim for easy adjust rear suspension).

anyone can give some idea??? is that normal??

Were they installed with new strut tops front AND rear? Skyline DMS 50mm need to be installed with new pillow ball strut tops front and rear, you can't re-use the existing tops at either end.

The chirping noise may be a dry shaft seal, prone to making the sort of noise you describe.

DMS used to supply a circular metal "top hat ring" to weld to the OEM pressed metal top spring seat, and a turned out DMS top spring seat to slip over the top hat ring. That way the OEM top seat / and damper shaft bushes can be reused. Pillow ball tops are not required given the design nature of the suspension.

Were they installed with new strut tops front AND rear? Skyline DMS 50mm need to be installed with new pillow ball strut tops front and rear, you can't re-use the existing tops at either end.

i only have new strut top on front:( they didn't told me i need rear one:(

The chirping noise may be a dry shaft seal, prone to making the sort of noise you describe.

DMS used to supply a circular metal "top hat ring" to weld to the OEM pressed metal top spring seat, and a turned out DMS top spring seat to slip over the top hat ring. That way the OEM top seat / and damper shaft bushes can be reused. Pillow ball tops are not required given the design nature of the suspension.

thank you for help

so the strut top is not required for DMS 50mm coilover?

i went to Neal lowe today (DMS dealer QLD). they reckon the valve make some chirping noise. actually the front and rear all make chirping noise, i just coundn't hear the front noise during drive. if i press the 4 corner of my car, i can hear the chirping noise on all 4 corner. so I assume its normal. but what the knock come from? :banana:

Pillow ball tops are not required given the design nature of the suspension.

Aftermarket strut tops are required front and rear for the DMS when fitted to the Skyline! We deal with DMS on a regular basis (ourselves and Neil Lowe are the only QLD dealers), and straight from the mouth of the engineer that makes them, they need aftermarket strut tops!

Things must have changed from just a few years ago then, when DMS supplied our ER34 Tarmac struts AND the above hardware to mate up to the OEM pressed metal tops.

The assembly was done locally by the DMS agent with instructions faxed by DMS, and is a good solution that does NOT require new tops.

We still have the struts although they are no longer in the car, unfortunately the instructions were sent on a thermal printout fax so somewhat faded but still clearly indicating they came from DMS.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...