Jump to content
SAU Community

Recommended Posts

I've personally heard of 420kw being pushed through a stock 26, but it lasted 25 minutes.

Depending on boost levels, I'd say you could safely achieve around 350-370kw on stock internals before problems would arise.

2860-5's will be lucky to get you 310kw anyway...

I'm currently doing a upgrade to the -10's (GT2871R) and aiming for around 350kw on stock internals.

Nigel.

396rwkw+ N20 at the track on 15yo stock bottom end. Raced (drag racing... mid 10's) and regular street driving for 2 years. Only reason it went bang was a bad batch of fuel and a 300m burnout...

-5's... pft! easy.

Just get it tuned properly!!!

J.

P.S.

5 years ago, there were atleast 3 stock bottomend (re-built with prepped, stock parts) cars regularly racing with more than 450rwkw. They lasted more than 25min ha ha ha ha ha haha ha haha!!!

Edited by XRATED

Depends on the use of the car.

If you are doing track days here/there - 330rwkw would be as fast as i would push it, and consequentially use smaller turbos.

Plenty have motors have not lasted the distance. Just because a select few have does not mean by any stretch that they all will.

I've personally heard of 420kw being pushed through a stock 26, but it lasted 25 minutes.

Depending on boost levels, I'd say you could safely achieve around 350-370kw on stock internals before problems would arise.

2860-5's will be lucky to get you 310kw anyway...

I'm currently doing a upgrade to the -10's (GT2871R) and aiming for around 350kw on stock internals.

Nigel.

Are you kidding?

-5's will, have, will do again - over 400rwkw.

The -10's (ala GT-RS) will do over 450rwkw.

If you think -5's cant make more than 310rwkw you sir need to do some serious reasearch.

the -9s (GT-SS) will do 330rwkw.

Depends on the use of the car.

If you are doing track days here/there - 330rwkw would be as fast as i would push it, and consequentially use smaller turbos.

Plenty have motors have not lasted the distance. Just because a select few have does not mean by any stretch that they all will.

Are you kidding?

-5's will, have, will do again - over 400rwkw.

The -10's (ala GT-RS) will do over 450rwkw.

If you think -5's cant make more than 310rwkw you sir need to do some serious reasearch.

the -9s (GT-SS) will do 330rwkw.

+1

Have seen -5's at over 700whp, another car at over 620whp.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...