Jump to content
SAU Community

Recommended Posts

Hi Guys,

I am looking at upgrading my brakes all around on my V35 Couple (2006) and I am tempted by the V36 sport brakes package with the V35 adaptor. The car is mainly daily driving with the odd track day and better brakes would be nice. I dont want brakes that require warming up in the morning though like a lot of those big brake kits seem to.

These guys sell the whole kit for US$1944 + $330 postage = roughly AU$2500

http://www.conceptzperformance.com/Cart/de...121.208.162.117

Has anyone tried this setup and happy with it?

It seems like a fairly good price but are there better options locally?

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/296827-v36-big-brake-kit-on-v35-coupe/
Share on other sites

There's a dude with a set on his Z33. They really fill out the OEM 18" wheels.

Craved sent me a link to someone who melted the dust boots in his Akebonos on the track, but its hard to say how hard that guy punishes his brakes.

HiPo Calipers & Rotors don't require warming up unless the rotors are composite. It's the pads you use which determines how the brakes react when cold.

There are better options if you want a performance brake kit. The V36 kit are just bigger and not necessarily better than say the Brembo off the 03/04.

There was a road test done comparing the Brembo to Akebono on one of the US forums. From memory there was little to gain by getting the Akebono over the Brembo let alone a true HiPo setup.

Edited by mosoto
There was a road test done comparing the Brembo to Akebono on one of the US forums. From memory there was little to gain by getting the Akebono over the Brembo let alone a true HiPo setup.

Got a link? I wouldn't mind seeing what their testing criteria and methodology was.

Price looks good, I have no idea about performance improvement though... but performance has to be better than the stock 05/06 'Nissan' brakes which in my experience struggle badly on the track (not to mention the chew through pads on the track... and I've tried the best from just about every manufacturer that actually makes a performance pad for the 05/06 brake set-up, which unfortunately is very limited i.e. Lucas, Hawk, QFM and Project Mu. Nismo may also make one, but I havent investigated, I am happy with Project Mu HC+ until I upgrade the entire setup, but Proj Mu HC+ are relatively expensive at $340-380 an axle, depending on the exchange $AUD/Yen)

For price comparison on the brake kit, I've been quoted around $4,500 including installation for the K-Sport 356mm-F/330mm-R from A&B Motorsport and also JustJap (both in Sydney) and $1700 for a second hand set of 350z/V35 Brembos from Hills Motorsport (but that depended on them getting a set in, which I've waited 6months and they still haven't!). I'm sure you will have seen other BBK Kits advertised on the internet, but in my search I've seen they tend to start at $6-8k and head north, which is more than I'm willing to spend when there are so many other things on my mods list!

they should be the same as 370 brakes but nissan would charge a left nut brand new...

I am very impressed with the akebonos, I've had the car for just over a year now, done two trackdays and a skidpan in that time not to mention my runs at WSID on stock pads & they still feel strong, didn't feel any of the dreaded brake fade even during a full day of punishment at wakefield on a 28/30 degree day

Got a link? I wouldn't mind seeing what their testing criteria and methodology was.

Hmmmmmm can't seem to find it, I'll keep looking.

FWIW they were pro's not backyard boys. Testing was at a track or a closed airstrip. Plenty of instruments using one car and swaping out the brakes for each group of tests.

Tests included straight line braking distance measurements at various speeds, endurance testing, you know all the usual stuff. I remember it stating the Brembo were not that much better than a regular set of oem calipers & rotors :) .

Are you referring to Zeckhausen's Stoptech test? The Brembos do have an advantage on multiple stops.

I've noticed how much more punishment my used OEM Brembos took, with stock (used) consumables. I found that I could brake harder for longer on the track with the OEM rotors/pads, even compared to when I still had the shitty single piston brakes running Ferodo DS2500s and DBA rotors (RBF600 fluid in both cases).

Edited by scathing

Yeah I've read that one and tbh may be confusing some of it with the other. Obviously there's no Akebono in Zeckhausens test but there was a comparo elsewhere that I obviously need to find.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...