Jump to content
SAU Community

I Need To Fix My Rear Camber Problem... And Other Shit Too

T0nyGTSt
 Share

Recommended Posts

T0nyGTSt Grand Master

T0nyGTSt

Posted
Posted

ok... here's my life story

i had HKS hypermax 2s... the rear pair are f**ked so i paid a small fortune for Bilsteins and shit low King springs... the car always had rear camber issues so i fed it crap compliance tyres... all thru that time I went thru 1 set of fronts and countless sets of 90% 2nd hand rears... my driving style is shit too i suppose

ok years later i smashed the front left bilstein shock because i have a bad habit of not slowing down for speed humps

i found the HKS hypermax fronts in my garage and had them installed

to my surprise they are quite good... slightly rattley but better than the Bilsteins

my Bilstein rears are kinda leaking but not too bad - it's liveable

i have given up fixing the HKS shocks... (this is a stupid saga all in itself)

so my question is... anyone is sydney who can definitively fixed my rear camber? I called so many so called suspension specialists and it seems like I'm asking them to fit rocket boosters to a russian space shuttle. Many do not like the Whiteline camber kit either.

I thought about buying stock rear springs and getting a new pair of KYB (or whatever?) rear shocks or getting the springs fitted to my rear bilsteins? I dunno.

I realistically need a drive in, drive out, one day solution. Don't particular care too much about ride height (can go back to stock height and softness) as this car is a daily.

car is a 33 gts turbo

as you can tell I'm kinda over this whole bloody suspension caper

oh here's a story about how I feel... I got defected so I had to get a 'stock looking' exhaust. I talked to about a dozen exhaust shops and seriously... what a pack of retards. Not dealing with exhaust shops really made my day.

It was easiest for me to pick up a 2nd hand jap exhaust (Fujitsubo Legalis turned out to be) and get it fitted by a local mechanic.

nisskid Grand Master

nisskid

Posted
Posted

chuck some adjustable camber arms on and get an alignment. the reason why shops dont like whiteline camber kits (the offset bushes) is because they are cunts to adjust as opposed to adjustable arms which are on-car adjustable.

SLY-25T Mentor

SLY-25T

Posted
Posted

give Wholesale Suspension a call out at Penrith. I made the trip there from Liverpool just to get my wheels aligned. theyve got a 60grand laser aligning machine and can do camber, castor, toe etc all to your specs.

SLY-25T Mentor

SLY-25T

Posted
Posted

oh btw ive got just jap adjustable rear camber arms and front castor.

steve, my cars a daily and has standard suspension but i think its sagged and the arms are fine. havent moved since ive got it done

SLY-25T Mentor

SLY-25T

Posted
Posted

feels alot better now mate. sadly i dont have any specs. i adjusted the camber myself when i installed them. only had a bit of negative on them but the boys said it was pretty far out. same with the front castor. lol. they asked me if i wanted any specific settings and i just said no, make it good for everyday. so im guessing 0-1 degree camber out back and the rest pretty true. just a guess though. lol

SLY-25T Mentor

SLY-25T

Posted
Posted

my rear tyres were rooted from camber wear until i bought the camber arms. havent had any problems with wear on the front though. sorry cant help ya there mate. if you do lower and have all the necessary adjustable parts, they should be able to make it fine. all i can think of is tyre clearance with rear guards if its lowered. if they straighten the camber, you may need to roll the guards.

nisskid Grand Master

nisskid

Posted
Posted
Are these arms good for street/daily alignment when the car is lowered only 20-30mm?

whiteline arms are fine for street, they use a urethane bush.

offset bushes are cunts to use and i wouldnt recommend them to anyone.

TALBO Grand Master

TALBO

Posted
Posted
whiteline arms are fine for street, they use a urethane bush.

offset bushes are cunts to use and i wouldnt recommend them to anyone.

So all I need to do is get rear or front and rear adjustable upper arms?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      GTR R34 Limp Mode

      By GTSBoy · Posted

      Has equal chance of cleaning an AFM and f**king an AFM. I think you can work out what happened. When the Hitachi ECU sees the AFM die and goes into the associated limp mode, then it will start and run just fine, because it ignores the AFM and just runs on idle maps that will do what it needs to get it going. But there is no proper load signal, so that's about all it can do. My suggestion? If you don't want to go full aftermaket ECU, then get some R35 GTR AFM cards and some housings to put them in, in the stock location, and Nistune the ECU. Better to do a good upgrade than just replace shitty 40 year old tech with the same 40 year old tech.
    • steven7270
      GTR R34 Limp Mode

      By steven7270 · Posted

      So my car was recently having trouble starting on initial crank, I would need to feather the gas for it to start up but besides that it would start and run fine. So I clicked the idle air control valve (with throttle body cleaner) and cleaned the MAF sensors (with MAF cleaner). The start up issue was fixed and now the car turns over without the assist of the throttle, but the car is in limp mode and wont rev past 2.5k RPM. From what I understand the IACV would not put the car in limp mode, so I am to believe it is the MAF sensors, but it was running fine before and now I cant get it out of limp mode. I cleaned the MAF made sure the o rings were seated properly. Made sure the cables were plugged in properly, the cables also both read the same voltage. Does anybody know why this is or what could be causing this or how to get it out of limp mode?
    • Dose Pipe Sutututu
      SAUNSW - Cruise - Albion Park Aviation Museum - 9th August

      By Dose Pipe Sutututu · Posted

      Ooo I might actually come and bring the kids, however will leave the shit box home and take the daily
    • PranK
      Rusty roof repair

      By PranK · Posted

      Thanks. Yeah I realised that there's no way I'd be able to cover the holes with the filler, it would just fall through. Thanks again @GTSBoy!
    • GTSBoy
      Rusty roof repair

      By GTSBoy · Posted

      That was the reason I asked. If you were going to be fully bodge spec, then that type of filler is the extreme bodge way to fill a large gap. But seeing as you're going to use glass sheet, I would only use that fibre reinforced filler if there are places that need a "bit more" after you've finished laying in the sheet. Which, ideally, you wouldn't. You might use a blob of it underneath the sheet, if you need to provide some support from under to keep the level of your sheet repair up as high as it needs to be, to minimise the amount of filler you need on top. Even though you're going bodge spec here, using glass instead of metal, the same rules apply wrt not having half inch deep filler on the top of the repair. Thick filler always ends up shitting the bed earlier than thin filler.
×
×
  • Create New...