Jump to content
SAU Community

Recommended Posts

R34 GTR SKYLINE

bayside blue

70xxx kms

Brand new garret 2560-5 turbos Fitted about a month ago with recipes

serviced with all new fluids when turbos were done

zeal coil overs

nismo indicators front and side

bridgestone re01's

THis car is in a1 condition through out and all inspections are welcome will pass with flying colors, i am no longer in the position to keep the car due to work commitments. If your after a very clean and tidy stock r 34 gtr this is a perfect example of a as new gtr.

CAR IS LOCATED IN ADELAIDE

call me on 0423697701

$48950

kind regards kane

IMG_0102.jpg

2.jpg

8.jpg

IMG_3062.jpg

IMG_1437_resize.jpg

6.jpg

4.jpg

5.jpg

IMG_1435_resize.jpg

IMG_1432_resize.jpg

IMG_1278_resize.jpg

IMG_0129.jpg

Link to comment
https://www.sau.com.au/forums/topic/296954-mint-condition-r34-gtr-v-spec/
Share on other sites

hey mate i was just upgrading them as i was going to go for a bit more power and at the time had alot of plans with the car etc but due to work i cant afford to keep the car as i need a ute and its not something you want to be driving to building sites :thumbsup:

hey mate, got your PM - thanks for the offer.

if you get to a point that you just want a quick sale - give me a yell and we'll work out a deal.

im in sydney, but theres no problem flying over there and driving it back. i've already sold my car so cash is ready.

either way good luck with the sale - i'm still having lots of fun hunting around for my new pride and joy - heaps to choose from at the moment and the prices should drop even more in the new year, so theres no hurry. :)

cheers!

Edited by KR4-GTR
  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...