Jump to content
SAU Community

Recommended Posts

i have for sale a series one r33 gtst boot lid and series 1 spoiler $150 will need a paint to suit the colour of your car currently is wine red and the clear is peeling of the boot lid but not the spoiler

stock side mount intercooler no pipes $30 each x2

stock r33 sway bars dont know what there worth make an offer

big oval muffler5 inch tip 3 inch inlet $90

2 stock cat one with the centre bash out make an offer

r33 stock wastegate $50

or swap for a stock turbo plz i need one

PLUS is anyone interested in swap a ducktail/stealth spoiler for a series 2 and series 1 wing let me know cause i really want a stealth spoiler

parts are on brisbane southside

Edited by Turbo 33
Link to comment
https://www.sau.com.au/forums/topic/297502-r33-parts/
Share on other sites

UPDATE I NEED THIS STUFF GONE MAKE AN OFFER I NEED THE SPACE WANT IT GONE SOON OR IT CAN ALL GO TO THE DUMP

series one r33 gtst boot lid and series 1 spoiler $150 will need a paint to suit the colour of your car currently is wine red and the clear is peeling of the boot lid but not the spoiler

underside of the bootlid plastic $30

stock side mount intercooler no pipes $30 each x2

stock r33 sway bars dont know what there worth make an offer

big oval muffler5 inch tip 3 inch inlet $90

2 stock cats one with the centre bashed out $15 each

r33 stock wastegate $50

aac valve $30

stock top part of the rb25det plenum $50

stock boost soleniod $30

stock rear bar damaged just needs a plastic weld my exhaust burnt it :nyaanyaa: $40

stock front pipe heat shield $10

stock dump pipe heat shield $5

perfer pick up but will post at buyers expense

post-41282-1259549529_thumb.jpg

post-41282-1259549695_thumb.jpg

post-41282-1259549827_thumb.jpg

post-41282-1259549971_thumb.jpg

post-41282-1259550072_thumb.jpg

post-41282-1259550170_thumb.jpg

post-41282-1259550288_thumb.jpg

post-41282-1259550401_thumb.jpg

post-41282-1259550490_thumb.jpg

post-41282-1259550624_thumb.jpg

post-41282-1259550778_thumb.jpg

post-41282-1259550891_thumb.jpg

Edited by Turbo 33
Link to comment
https://www.sau.com.au/forums/topic/297502-r33-parts/#findComment-4962835
Share on other sites

  • 3 weeks later...

i also have 4 rims no tyres 3 rims are good 1 has a buckle not sure on model or offset but i can find out the offset tomorrow there 18 by 8 they have abit of gutter rash will also get some more pics tomorrow looking for around $350 for the 4 of them or swap for items of interest eg. trust front bar, stock 33 turbo, etc let me know what you have

r33 stock wastegate $50

aac valve $30

stock top part of the rb25det plenum $50

stock boost soleniod $30

stock rear bar damaged just needs a plastic weld my exhaust burnt it $40

stock front pipe heat shield $10

stock dump pipe heat shield $5

stock cat with centre bashed out $20

series one r33 gtst boot lid and series 1 spoiler $150 will need a paint to suit the colour of your car currently is wine red and the clear is peeling of the boot lid but not the spoiler

underside of the bootlid plastic $30

stock side mount intercooler no pipes $30 each x2

stock r33 sway bars dont know what there worth make an offer

post-41282-1262776984_thumb.jpg

Edited by Turbo 33
Link to comment
https://www.sau.com.au/forums/topic/297502-r33-parts/#findComment-5019685
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...