Jump to content
SAU Community

Rb26dett Fully Built 1000 Hp (0 Mileage)

LHD_GTR
 Share

Recommended Posts

LHD_GTR Rookie

LHD_GTR

Posted
Posted

Do not miss this great deal!!!!! Fully Built (0 mileage after build) RB26DETT race engine for sale. It can easily handle over 1,000HP, has the following and more:

  • Polished / Ported Head
  • 1000cc injectors
  • new valves
  • tomei valve springs
  • HKS 272 camshaft in/ex
  • ARP main bearing studs
  • ARP head studs
  • Polished Block
  • Tomei Cam pulleys
  • Aeromotive Fuel Regulator
  • HKS Fuel rail
  • HKS Pulley Damper
  • Tomei Full Race Gasket Set
  • ACL Race Bearings
  • Tomei Connector Rods
  • CP Pistons
  • 1,000cc Injectors
  • Aeromotive Fuel Regulator
  • Race intake Plenum
  • Big Single Throttle Body
  • Jun Oil Pump
  • Greddy Oil Sump
  • Greddy T88

Turbo with headers and HKS wastegate

Also many more items not mentioned above, It is fully built and the parts alone were purchased for more than BHD5,000 (excluding main engine and labor charge). Willing to sell completely built engine (including Turbo Kit) for AUD 13,000 (neg.).

Please contact Ali

00973 39330337 or email on [email protected]

sebastion Proficient

sebastion

Posted
Posted

hey mate,

just a couple of questions for your sake,

where are you located?

will you post?

how much for postage to different area's?

can you put some pics up, it will help lots?

what sort of saftey is there for the buyer, as you are new, not implying that you are dodgy or anything, but security is nice...

apart from that, your price is very good for all that gear, and you should have no issues selling it. all the best

cheers

LHD_GTR Rookie

LHD_GTR

Posted
  • Author
Posted
hey mate,

just a couple of questions for your sake,

where are you located?

will you post?

how much for postage to different area's?

can you put some pics up, it will help lots?

what sort of saftey is there for the buyer, as you are new, not implying that you are dodgy or anything, but security is nice...

apart from that, your price is very good for all that gear, and you should have no issues selling it. all the best

cheers

Thanks Sebastion.... I'm located in Bahrain, I'm not sure how much postage would cost, so I don't know if i can pay all myself or shre the postage fee with the buyer (I'll research it and update). I'm getting some pics this weekend hopefully i can upload them. As for safety, I'm not sure what type of safety i can offer maybe u can suggest (I never sold engine before :thumbsup: ) maybe u can suggest what the norm is?

Cheers....Ali

sebastion Proficient

sebastion

Posted
Posted
Thanks Sebastion.... I'm located in Bahrain, I'm not sure how much postage would cost, so I don't know if i can pay all myself or shre the postage fee with the buyer (I'll research it and update). I'm getting some pics this weekend hopefully i can upload them. As for safety, I'm not sure what type of safety i can offer maybe u can suggest (I never sold engine before :P ) maybe u can suggest what the norm is?

Cheers....Ali

hey Ali,

jeez, your a fair way away, our guess is that postage would be a fair bit, and that would be a fair dint in your pocket, as the engine is cheap enough, as for saftey, not too sure how to go about that, only thing would be paypal, but they are a rip-off... you should just sell it too one of the fella's in dubai, surely they would have enough money for an engine of these specs... cant wait to see pics mate, bet you would be disapointed to sell it, as we know how much money has been pored into it... anyways good luck with the sale mate. hopefully people realise what a bargin it is.

sebastion Proficient

sebastion

Posted
Posted
Hey Ali,

just a few more questions, who built the motor, ported the head etc. Is the crank stock and which T88 is it ?

Cheers,

Stav

our guess would be the 38gk, as thats rated a tad higher than 1000hp.

LHD_GTR Rookie

LHD_GTR

Posted
  • Author
Posted
Is this for real??.....

Sounds abit suspicous to me....

Why Suspicious? I had an R33 I was building for the drag race, but i got a good price for a sale without the engine... now I'm stuck with the engine, I was gonna put it in my 180sx but traffic directorate said "no way" it would pass inspection, so I have to sell the engine now and start all over with a SR20 :P

Swiper the Fox Grand Master

Swiper the Fox

Posted
Posted (edited)
Why Suspicious? I had an R33 I was building for the drag race, but i got a good price for a sale without the engine... now I'm stuck with the engine, I was gonna put it in my 180sx but traffic directorate said "no way" it would pass inspection, so I have to sell the engine now and start all over with a SR20 :P

3 posts and asking lots of cash..thats sus..its the internet...sorry.

just post a pic of the engine with you standing next to it holding a sign that says LHD GTR SAU...just to confirm you have it would put a genuine buyer at ease.

cheers

Edited by DiRTgarage
LHD_GTR Rookie

LHD_GTR

Posted
  • Author
Posted
Hey Ali,

just a few more questions, who built the motor, ported the head etc. Is the crank stock and which T88 is it ?

Cheers,

Stav

Stav,

the negine was built by locals who have quite a succesfull drag racing team, the head was also ported by a local (no special equipment but he is good) the crank is stock and I'm not sure which T88 it is but I'll check... I attached some pics of other cars the mechanic built: the shop is called 'Get Boost' he has built many more but these are the latest....

regards,

Alipost-18738-1259065895_thumb.jpg

post-18738-1259065957_thumb.jpg

post-18738-1259065973_thumb.jpg

post-18738-1259065987_thumb.jpg

post-18738-1259066066_thumb.jpg

post-18738-1259066234_thumb.jpg

post-18738-1259066278_thumb.jpg

post-18738-1259066324_thumb.jpg

post-18738-1259066479_thumb.jpg

LHD_GTR Rookie

LHD_GTR

Posted
  • Author
Posted
3 posts and asking lots of cash..thats sus..its the internet...sorry.

just post a pic of the engine with you standing next to it holding a sign that says LHD GTR SAU...just to confirm you have it would put a genuine buyer at ease.

cheers

Cool I can do that, How about I hold that day's newspaper as well :P

LHD_GTR Rookie

LHD_GTR

Posted
  • Author
Posted
agreed.. $13,000 for an engine 10,000km away from a new user. if its legit, good luck trying to sell!

OK I get it... I would be suspicious as well, but that's the deal. Although I need to double check on the shipping if its too much I'll either increase price or just try to sell it in Dubai...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...