Jump to content
SAU Community

Trust T78-33d Kit For Sale


Recommended Posts

FOR SALE

TRUST T78-33D

Manifold

External Gate 50mm

Dump Pipe

Inlet Pipe

Twin Entry Filter

2 x K&N filter

Turbo has done less than 2000km since new and made 504hp @ 20psi. Awesome setup for any GTR, just bolt on and tune.

$3800

Also selling Power FC D-jetro with Apexi Boost controller kit with tune ( computer purchased new at the same time)

$1400

Will also sell near new SARD 800cc injectors if anyone want to the full package to bolt on for a turn key 500hp at 20psi ( just add your own intank 044). Give us a call only to happy to help.

Seller: Nigel Brown

Phone: 0417 981 596

post-16067-1259158288_thumb.jpg

post-16067-1259158640_thumb.jpg

post-16067-1259159147_thumb.jpg

Link to comment
Share on other sites

FOR SALE

TRUST T78-33D

Manifold

External Gate 50mm

Dump Pipe

Inlet Pipe

Twin Entry Filter

2 x K&N filter

Turbo has done less than 2000km since new and made 504hp @ 20psi. Awesome setup for any GTR, just bolt on and tune.

$3800

Also selling Power FC D-jetro with Apexi Boost controller kit with tune ( computer purchased new at the same time)

$1400 (SOLD PENDING FUNDS)

Will also sell near new SARD 800cc injectors if anyone want to the full package to bolt on for a turn key 500hp at 20psi ( just add your own intank 044). Give us a call only to happy to help.

Seller: Nigel Brown

Phone: 0417 981 596

post-16067-1259158288_thumb.jpg

post-16067-1259158640_thumb.jpg

post-16067-1259159147_thumb.jpg

Link to comment
Share on other sites

Does this single set-up require the power-fc de jetro? i have power fc with z32 afm an all the good bits, was curios if that mattered? an also it wasn't a lag monster was it? wat rear housing? wen was full boost? im running a fully built rb26 tomei engine basically wit gt2860 -7 :S they aint gonna cut it but if you could answer those questions you may have yourself a buyer :)

Bye the way nice engine bay mate!

Link to comment
Share on other sites

Does this single set-up require the power-fc de jetro? i have power fc with z32 afm an all the good bits, was curios if that mattered? an also it wasn't a lag monster was it? wat rear housing? wen was full boost? im running a fully built rb26 tomei engine basically wit gt2860 -7 :S they aint gonna cut it but if you could answer those questions you may have yourself a buyer :laugh:

Bye the way nice engine bay mate!

Yes the Trust twin entry suction pipe was designed to fit directly onto Z32's and run a power fc.

Turbo was building boost by 4K and pulling hard over the mid 4K region. Did vary a little and felt more responsive down low when under high load. Those figures where from straight line driving. Turbo never drops off boost between gear changes and was a great setup on some tight and flowing hills roads.

Not sure what housing size is as the numbers on the exhaust housing don't correspond to anything that makes sense, but ive gotten these numbers from the ID tag.

Make: T78-33D

Serial No: B276501

MFD No: 49175-02020

Hope this helps and it will be a very strong setup on a built engine, and thanks for the kind words on the engine bay.

Cheers

Nigel

Link to comment
Share on other sites

  • 2 weeks later...

Hey Mate, i will speak to my mechanic today, being monday the 13th an see wat he says but is it possible to grab your phone number? currently overseas in iraq atm that is all but i am from perth car is currently bein built as we speak an would be an interesting upgrade whilst the engine is out, so im interested but i will have to get back to you asap after i ring my mechanic.

Cheers Korey

Link to comment
Share on other sites

Hey Mate, i will speak to my mechanic today, being monday the 13th an see wat he says but is it possible to grab your phone number? currently overseas in iraq atm that is all but i am from perth car is currently bein built as we speak an would be an interesting upgrade whilst the engine is out, so im interested but i will have to get back to you asap after i ring my mechanic.

Cheers Korey

So now i feel like a dick lol, seen ya number will give you buzz first thing monday morning 14 dec, you should have an answer buy the end off that day mate!

Cheers!

Link to comment
Share on other sites

Thanks Marty (mxracer),

I'm currently in China for work till the 28th of this month with no mobile coverage.

Please PM me or add to the post with any questions and ill keep you all informed. Turbo will be available for pick up or post from the 29th.

Turbo is sold to a Perth buyer, but i cant confirm this until i arrive home.

Thanks

Nigel

if nigel doesnt answer dont panic , i think he is overseas too atm ,

ps ive been in this car and its a weapon !!

Link to comment
Share on other sites

Thanks Marty (mxracer),

I'm currently in China for work till the 28th of this month with no mobile coverage.

Please PM me or add to the post with any questions and ill keep you all informed. Turbo will be available for pick up or post from the 29th.

Turbo is sold to a Perth buyer, but i cant confirm this until i arrive home.

Thanks

Nigel

So if the turbo is sold would you be willing to sell the remainder being the:

Manifold

External Gate 50mm

Dump Pipe

Inlet Pipe

Twin Entry Filter

Cause i will snap them up as soon as you arrive to australia without a doubt!! My mechanic says it will be perfect an on my built engine will push numbers beyond 600hp at the wheels, but if the turbo is sold that is no probalem still the remainder like i said above is more then ample.

Cheers Korey

Link to comment
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Agreed with the rest. Also at least based on my own research, there are no readily available stock or close-to-stock RB20Neo maps that you could download and use as a base were you to buy a complete standalone ECU, and the regular 20DET maps don't really work well so you'd need to take it to a tuner if you have no experience. I installed an AEM V2 on my 20Neo+T and had lots of headaches until I got it to run and idle properly but I've yet to remap it fully. You have to start building up your timing and fuel maps entirely from the ground up; even the ones for a 25 didn't work at all.
    • Got some decent progress after work yesterday and also today. Got the ECU all wired and passenger side interior all back together. Kept the wiring up nice and high to avoid people standing on it. Got the surge tank relays rewired and tidied up the pump wiring and cut a hole to bring the cables through.  I found a spare USB cable I had lying around so I decided to cut it up and see if I could use it for my CAN 1 bus. Turned out one of the pins I needed was to the shield of the cable so i cut it up and desoldered it and resoldered to the correct pins.  Had the issue with the powersteering hose hitting the A/C compressor and fan shroud. I pulled the bracket off and modified it to remove the front mounting point which now clears it all. Will keep an eye on it to see if theres any signs of fouling once it's up and running.
    • That's some good input mate. Nice.
    • So today I went well outside my comfort zone (again) to replace my valve cover gasket.  I have had a big leak over the exhaust leading to a lot of smoke and smell every time I drove it. The leak was in the rear driver's corner.  The job wasn't hard as such, just a bit finicky and time consuming.  The old gasket was rock hard and broken right where the leak was.  The leaky corner had so much sitting oil in it.  The good news to my amateur eyes was no buildup or sludge under the cover. It all looked fairly nice in there.   I haven't started it yet. I ran out of light and body when putting the coils and injector loom back in. Probs only 30min left for the morning.  I was so nervous putting the cover back on, I must have lifted it 5 times to make sure the gasket was still seated properly. God it's going to be nice to be leak free and not make other traffic light queuers think my car is about to explode.
    • Gave the Mazda it's first wash, it will need some clay, a light compound, and polish polish to remove a few swirl marks, but that will be a job for when I have a full day to get my DA polisher action on
×
×
  • Create New...