Jump to content
SAU Community

Recommended Posts

Item: 2 pieces of 3M carbon fibre vinyl for wrapping your B-pillars.

Cost: $40 posted for 2 pieces of 3M CF vinyl (enough to wrap both pillars).

Installation: Either DIY or I can do it for you. For interstate buyers, if you want, you can send me your pillars and I'll wrap it for you for $40+postage back to you. For Victorian buyers, I can wrap it for you free of charge.

Contact: Call or SMS me on 0434 502 855 or PM me on forum.

The 3M CF vinyl has a satin finish, but it can be sprayed over with a clear coat, to make it look glossy. Nengun sells the original Nismo Pillar Garnish for I think $130 plus postage, so if you don't want to pay so much, this is your solution ;)

Here's some pictures:

img1360dd.jpg

img1361.jpg

img1363qt.jpg

img1368.jpg

img1422.jpg

NOTE: I can provide the CF vinyl for other parts as well, if you give me the measurements and you can DIY or I can wrap it for you.

Here's a thread of what I've done:

http://www.skylinesaustralia.com/forums/Ca...ap-t296681.html

Link to comment
https://www.sau.com.au/forums/topic/298139-carbon-fibre-vinyl-for-b-pillars/
Share on other sites

how hard is it to wrap yourself man?

did u use a hairdryer to soften the edges to get a clean finish?

Yup, that's right, difficulty is like 3/10 lol.

And even if you don't get it right the first time, since it's vinyl, you can always we work it.

But I can always quickly explain how to do it on the phone :D Only takes less than 10mins for each side.

Hey mate,

Not sure if you're willing to share since you're selling these, but worth a try anyway lol...

Any chance on giving us all a heads up on where you source your 3M Carbon Fiber Vinyl (or 3M Di-NOC Carbon Fiber Vinyl) if that's what you get?

I wouldn't mind wrapping a fair few interior parts in this stuff... Looks the goods from what I've just read up and seen!!!

Alternatively, would you sell by the square meter or what ever?

Cheers,

Andy

Edit: All good, I found a place in Victoria that can get it!

Edited by AnDyStYLe
  • 1 month later...
Hey mate,

Not sure if you're willing to share since you're selling these, but worth a try anyway lol...

Any chance on giving us all a heads up on where you source your 3M Carbon Fiber Vinyl (or 3M Di-NOC Carbon Fiber Vinyl) if that's what you get?

I wouldn't mind wrapping a fair few interior parts in this stuff... Looks the goods from what I've just read up and seen!!!

Alternatively, would you sell by the square meter or what ever?

Cheers,

Andy

Edit: All good, I found a place in Victoria that can get it!

Hi Andy..can you pm me where you get it from?? cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've got a 2011 J50 that I imported six years ago. The unmodified factory AV system date and time has always been correct ( Japanese timezone of course ) up until last month. About two weeks ago, at engine start, the system wished me a happy new year ( in Japanese of course ). I can't think of anything that would make the system think that the date had changed, unless the GPS component has failed/reset somehow ? I checked the GPS reception in the system settings, and it can still see the satellites. Has any other J50 owner had this happen ?  It's no biggie, just annoying that it tells me the wrong date anytime I start the engine. 😅
    • Love following your adventures on IG, hopefully if you're still around in Japan when we visit again wouldn't mind going for a few beers with you (that's if you're keen on hearing how I hate Nissans).
    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
×
×
  • Create New...