Jump to content
SAU Community

Recommended Posts

Item Summary: R33... RB 25 270rwkw on 15psi

Location: SA: Adelaide

Condition: Good

Reason for Selling: swap for ceffy etc

Asking Price: 15000 (neg) or swap

Delivery Methods: PickUp

Contact Info: pm or sms 0405 523 293 :P

Extra Information:

Engine:

rb 25

New exhaust/intake manifold studs and nuts etc

New RB25 oil pump

OS Giken twin plate clutch

T70 turbo

6boost style steam pipe manifold made by GARAGE7 (makes for a mean sounding RB)

Cooling:

600x300x76 cooler

52mm alloy radiator

twin thermo fans

Interior:

fixed back race seat

dished drift steering wheel

in dash mounted oil pressure, water temp, and boost gauge's.

rest standard and clean

fuel system:

walbro 550hp in tank pump

malpassi fuel pressure reg

wheels:

G-Max 18x9.5 all round

body:

needs a little work on rear quarters from big guard flaring and roof fading.

Suspension:

Tien fully adjustable coils (7kg front and 5kg rear springs im guessing)

JIC Front camber arms

adjustable rear camber arms

Estimated Power: 270rwkw on 15psi

post-56550-1259474041_thumb.jpg

post-56550-1259474335_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/298211-270rwkw-r33/
Share on other sites

just an update guys: had the car out at mallanats yesterday as i scored a free entry.. did a bit of a expression session demo thing with monkhouse, broadbent, May and a few other.. car went excellent and am now having second thoughts on selling it haha

Link to comment
https://www.sau.com.au/forums/topic/298211-270rwkw-r33/#findComment-4972803
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
×
×
  • Create New...