Jump to content
SAU Community

Recommended Posts

This is a 1.5 way mechanical LSD diff centre.

Not sure of what the brand is, i took a photo of some of the prints on the centre, if anyone does know can they please tell me.

I took it out of my R33 gtst as im selling the car and figured it would be worth more.

Centre seems to be in good condition, was a tiny bit noisy, had a slight wine at about 80-90kmh

This diff locks both wheels on and off acceleration, its pretty tight.

It has seen one track day at calder park that is it, apart from the odd slide on the streets.

any questions welcome

will post at byers expense

post-37613-1259748094_thumb.jpg post-37613-1259748496_thumb.jpg post-37613-1259748219_thumb.jpg post-37613-1259748747_thumb.jpg

has it got the standard ratio ?

how do you know its a 1.5 and not a 2way?

is there noise because it needs to be re shimed?

thanks.

Sorry for the late reply people. Im not 100% sure that its a 1.5 way however this is what i was told when i bought the car.

Im looking for $400 plus postage

cheers

Its a Nismo diff, (or a standard)

If you grab a photo of this section:

R200NISMOramps.jpg

Its its cut to a diamond shape (4 cuts) its a 2 way, if its just got 2 cuts and is kind of triangle shape then its a 1.5 way.

The one pictured in this post would be a 2 way as it would have 4 cuts, but the shadow covers the top 2 cuts.

Edited by JiN_MaN

I got an e-mail from Daniel, that's about it..

I asked if the standard shafts will fit, because usually Nismo diffs require Nismo shafts to fit. If the stock shafts don't fit I'm out :)

Unless is the last model of the Nismo diff's, Nismo Pro (I think thats what they called them) then your standard shafts will fit be no problem. :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...