Jump to content
SAU Community

Recommended Posts

Hi Toshi,

I am in Perth and currently have a R33 Skyline with exhuast, fmic, pod, apexi neo (safc) and greddy ebc - dyno tuned making 193 rwkw (260hp) the car does seem to have a large mid range flatspot - what power would you expect to get with a ecu remap for my car? and will it get rid of the flatspot?

Cheers,

Steve

Hi Toshi,

I am in Perth and currently have a R33 Skyline with exhuast, fmic, pod, apexi neo (safc) and greddy ebc - dyno tuned making 193 rwkw (260hp) the car does seem to have a large mid range flatspot - what power would you expect to get with a ecu remap for my car? and will it get rid of the flatspot?

Cheers,

Steve

Normally around 200kw at 12psi.

I am able to fix flat spot .

Much smoother than s-afc.

Dear Toshi,

I live in Sydney and was wondering do you tunes on the spot.

I have an R32 GTS-T with turbo back exhaust, r34 smic, airfilter, walboro fuel pump, sard fuel pressure regulator and a vg30 turbo (off single turbo 300zx). Making dismissal power at the moment, needing tune drastically.

Please let me know quote for bring you the car (if option is available) tune etc.

Chris.

Dear Toshi,

I live in Sydney and was wondering do you tunes on the spot.

I have an R32 GTS-T with turbo back exhaust, r34 smic, airfilter, walboro fuel pump, sard fuel pressure regulator and a vg30 turbo (off single turbo 300zx). Making dismissal power at the moment, needing tune drastically.

Please let me know quote for bring you the car (if option is available) tune etc.

Chris.

Hi

I sent PM.

Thank you

  • 4 weeks later...

My customer got 207kw AFR 12 street chip

R33 GTST S1

split dump turbo-back exhaust with hi-flow stainless steel cat. Kakimoto racing muffler (very quiet)

splitfires, cold spark plugs.

FMIC

Greddy Profec Spec B- 12psi

Remapped ECU chip by Toshi

277hp -207KW

R33%20-AFR%2012%20207kw.jpg

Do you dyno tune or road tune? Where abouts in Sydney are you and what is the rate for a tune, car has nistune and i have the software and cable.

Do you dyno tune or road tune? Where abouts in Sydney are you and what is the rate for a tune, car has nistune and i have the software and cable.

I can road tune or dyno tune also dyno and road tune both.

Im north ryde.

Please tell me what is your car and mods.

I can road tune or dyno tune also dyno and road tune both.

Im north ryde.

Please tell me what is your car and mods.

Stagea s2 neo manual. FMIC, hi flow cat, gcg hi flow turbo, larger exhaust, split dump, EBC and nistune.

Hey Toshi

I have put a S2 RB25DET into my HR31 coupe with the folowing mods: fmic, 3 inch turbo back with no mufflers, boshi 040, greddy profec type 2 boost controller 8 low and 13 high psi, k and n pod and standard afm and injectors. I will be getting splitfires in the near future too. Also it was origionally an auto. What type of power should i be expecting? Can you pm me a price for the ecu tune and any other info?

Thanks mate

Adam

Edited by KDS_HR31
  • 8 months later...

I will make ecu remap according to your car modifications for R33 R34.

Price from only $400 now.

If you are not happy I will money back

If you are not happy please send back in two weeks.

Otherwise I can not refund money.

Hi Toshi,

are you able to Remap a series 1 rb25 for garrett GT2876R, denso 550cc injectors, z32 afm, bigger fuel pump and aim for around 260rwkw on 1-1.4 bar ?

Cheers charles

Hi Toshi,

are you able to Remap a series 1 rb25 for garrett GT2876R, denso 550cc injectors, z32 afm, bigger fuel pump and aim for around 260rwkw on 1-1.4 bar ?

Cheers charles

Where are you living?

odd request here

can you do a tune for a series 2 manual stagea? but, tune it for 95ron fuel?

pod and 3 inch turbo back exhaust, thinking about going up to 10psi in the future

i'm down in tassie and bp ultimate is about $1.70/litre

thanks

  • 2 weeks later...

I am planning to visit Melbourne around end of this month or next month(Jun or July)

Anyone interested in tuning?

R33 Cost $550 road tune

Please call 0410490049

Or [email protected]

  • 3 months later...

Hi Toshi,

You come highly recommended from a number of people I've spoken to, so I thought I'd ask:

I have an S1 R33 GTS-T, standard turbo, ECU, engine, etc. All it really has is a full exhaust, FMIC, and an Apexi AVCR that I have running at about 10psi (sometimes it gets to 11-12, and sometimes I switch it to "OFF" in the rain).

I've got the stock ECU in it at the moment, and while I live in Sydney, the car lives south of Wollongong.

I'm not after huge power, just something that gets rid of that "flat" spot in the middle of the stock ECU :) And makes the car a bit more fun to drive.

Would the mail-out ECU swap work out best? ($400 I think it was?) I'm just not too sure what to do; I've previously had a Power FC, and I was getting 202.1rwkw on it at around 10psi.

Thanks for any help!

Yes,std turbo is $400 exchange mail order tune.

If possible to come to me , I am able to real time road tune $550.

I think better for you.




  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...