Jump to content
SAU Community

Recommended Posts

Hi Guys,

Got some tyres and wheels I'd like to get rid of so here they are:

1. 4x Stagea rims/BBS forged rims 16inch - $120

My mate used the two rims with legal tyres to pass a blue slip on his S15. Will fit anything with a 5x114.3 (R33's may need a little spacer on the front to clear brakes)

Two good tyres (retreads) and two tyres which may or may not be just legal.

post-28122-1260277544_thumb.jpg post-28122-1260277588_thumb.jpg post-28122-1260277672_thumb.jpg

2. 4x Kosei Japanese rims light weight. front 17x8 rear 17x9 with tyres, but bald - $220

These rims came with my skyline from japan, they are very lightweight, few marks on them. 114.3x5 doesn't say offset, but Im guessing around +38 Sat flush on r33 with 2-3mil spacers.

post-28122-1260278150_thumb.jpg post-28122-1260278244_thumb.jpg

3. Aristo stock wheels 16x7.5 front 16.8.5 rear, tyres are on the markers, one has bad camber wear. Will fit vehicles with 5x114.3 - $140

These are off my aristo, tyres probably suit drifting or burnout tyres. Without centre caps, these wouldn't look to bad on a r32.

post-28122-1260278594_thumb.jpg post-28122-1260278642_thumb.jpg

4. R32 stock rim - legal tread $40

Good for a spare..

post-28122-1260278877_thumb.jpg

5. 17inch bridgestone tyre legal tread 225/45 $50

post-28122-1260278958_thumb.jpg

that's it fellas, priced them cheap for a quick sale.

Contact; pm me for my number.

Located in Sydney's West.

Cheers'

Daniel

Hi mate, i'm interested in the rims listed below.

2. 4x Kosei Japanese rims light weight. front 17x8 rear 17x9 with tyres, but bald - $220

These rims came with my skyline from japan, they are very lightweight, few marks on them. 114.3x5 doesn't say offset, but Im guessing around +38 Sat flush on r33 with 2-3mil spacers.

What part of sydney are you located and are they available to be picked up friday?

thanks

Hey guys, just realised the Kosei rims do have an offset on the back, its +45..

Sorry to the guy who came and looked at them..

They sat good on a r33 with 2-3mil spacers..they might fit without spacers too.

hey mate whats the offset on the stagea 16's?

Hi Guys,

Got some tyres and wheels I'd like to get rid of so here they are:

1. 4x Stagea rims/BBS forged rims 16inch - $120

My mate used the two rims with legal tyres to pass a blue slip on his S15. Will fit anything with a 5x114.3 (R33's may need a little spacer on the front to clear brakes)

Two good tyres (retreads) and two tyres which may or may not be just legal.

post-28122-1260277544_thumb.jpg post-28122-1260277588_thumb.jpg post-28122-1260277672_thumb.jpg

2. 4x Kosei Japanese rims light weight. front 17x8 rear 17x9 with tyres, but bald - $220

These rims came with my skyline from japan, they are very lightweight, few marks on them. 114.3x5 doesn't say offset, but Im guessing around +38 Sat flush on r33 with 2-3mil spacers.

post-28122-1260278150_thumb.jpg post-28122-1260278244_thumb.jpg

3. Aristo stock wheels 16x7.5 front 16.8.5 rear, tyres are on the markers, one has bad camber wear. Will fit vehicles with 5x114.3 - $140

These are off my aristo, tyres probably suit drifting or burnout tyres. Without centre caps, these wouldn't look to bad on a r32.

post-28122-1260278594_thumb.jpg post-28122-1260278642_thumb.jpg

4. R32 stock rim - legal tread $40

Good for a spare..

post-28122-1260278877_thumb.jpg

5. 17inch bridgestone tyre legal tread 225/45 $50

post-28122-1260278958_thumb.jpg

that's it fellas, priced them cheap for a quick sale.

Contact; pm me for my number.

Located in Sydney's West.

Cheers'

Daniel

Is the R32 rim off a GTR or GTS-T ??

Not sure if they are different offsets or not ??

I have a set of GTR wheels on my trailer and would need the same offset to suit as a spare.

Thanks.

Is the R32 rim off a GTR or GTS-T ??

Not sure if they are different offsets or not ??

I have a set of GTR wheels on my trailer and would need the same offset to suit as a spare.

Thanks.

Hi Mate,

not 100% sure, but I think the gtr wheel is 1inch wider??? and I am guessing the offset is not the same.

Cheers

Daniel

Thanks for responding.

I should've asked if you could check the wheel.

On the outside of the wheel, the size & offset is stamped between the stud holes and centre.

It should be (from memory) 16x8jj+30 I think ??

Caould you check please.

Thanks.

Thanks for responding.

I should've asked if you could check the wheel.

On the outside of the wheel, the size & offset is stamped between the stud holes and centre.

It should be (from memory) 16x8jj+30 I think ??

Caould you check please.

Thanks.

sorry mate, didn't have anything printed that looked like an offset???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...