Jump to content
SAU Community

Wtd R32 Gtr But Want To Trade My Dirt Bike As Part Payment

iwantone

By iwantone,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

iwantone Enthusiast

iwantone

Posted
Posted

Hi

I am looking to use my 07 rm250 as a part trade on a r32 gtr... not looking for a stupid change over figure just want a nice tidy GTR that isnt a wreck and i will part with some cash to make up the adjustment..

Here is a 2007 rm 250 its a very clean bike and very reliable 2 stroke weapon.

I am only selling it due to youngest son giving up riding due to lack of interest.

I am 43 year old swapper who is not fast nor do i give the bike a hard time.

I gave it a recent top end freshen up with rings, piston and gudgeon pin and clips , gaskets...

Only runs on vortex and Motul oil..... Air filter cleaned and oiled after every ride...

has had new pivot linkage bearings replaced approx 3 rides ago ..

has after market bars.. and folk seals replaced with genuine ones 2 rides ago...

forgot to add that comes with a brand new front tyre ( not fitted ) and back tyre is 3 rides old

can Pm me or contact me on 0413-112310 thanks

post-25886-1260561824_thumb.jpg

post-25886-1260561864_thumb.jpg

  • 2 weeks later...
iwantone Enthusiast

iwantone

Posted
  • Author
Posted
hey man, just wondering roughly how much those bikes are worth, roughly, because im looking at selling my R32 GTR aswell

Hi

the bike is worth around 5000-5500

Thanks

GTRClintR32 Enthusiast

GTRClintR32

Posted
Posted
Hi

Nice car How much were you looking as a change over figure?

Thanks

The bike is around $5000-$5500 I would be looking for $25000,

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Butters
      UniClutch

      By Butters · Posted

      Well they got my money but they are not getting my gearbox ! 
    • GTSBoy
      ECU sees many times the speed than speedo does (R34 swap)

      By GTSBoy · Posted

      It's needed for rolling idle up, and I think it is a decider on VCT also.
    • Kinkstaah
      ECU sees many times the speed than speedo does (R34 swap)

      By Kinkstaah · Posted

      I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...