Jump to content
SAU Community

Recommended Posts

hey guys need this stuff gonskis.

brand new t3/t4 turbo .300ono

one r32 rb2o ignitorn module 40buks

r32 copue taillights perfect nick black in colour

clutch master cylinder for a 32 40buks

in primer r32 turbo front bar 50buks

one greedy oil pressure gauge with grex sandwhich plate 150

2 rb20 alternators good condtion 50buks each

one r32 bn sideskirt ONE ONLY FOR R32 SEDAN PERFECT FIT FEW LIL CRACKS 50buks

pm want all these gone

Im guessing the front bar is for a sedan aswell? are they different to the 2dr? i need a front bar for a coupe and also drivers headlight and indicator let me know if you got any of them, contact me on 0433 998 250. cheers

Im guessing the front bar is for a sedan aswell? are they different to the 2dr? i need a front bar for a coupe and also drivers headlight and indicator let me know if you got any of them, contact me on 0433 998 250. cheers

front bars sedan and coupe are the same .pic up tomoz

ill take the gktech dump for $7 thankyou

bagaha sorry bro it was ment to say 70 but ill let it go for 50 pik up only thought.also comes with a gasket if i can find it lol

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...