Jump to content
SAU Community

Recommended Posts

Hi Guys,

Usual story - baby on the way, need bigger house, toys must go. My Nur is 1 of only 250 ever built. It was purchased brand new by a Kiwi who had it sent directly to Mines from factory for tuning. Including the original cost of the car, it's had NZ$350k spent on it and arguably sports the best of everything.

http://www.trademe.co.nz/Browse/Listing.aspx?id=259634078

Will be very sorry to see it go. I can be contacted via [email protected] or +64 21 227 4001

Cheers

Phil

115k landed registered and complied in australia?

mate he'd be losing about $65K if he did this for someone. I'm guessing that $115K is the asking price ex-NZ, which means $11.5K duty, plus shipping and handling, app $13K GST, and then (due to the price) about $25K in luxury car tax (30% of the excess over $60K). This is $165K already, and then probably another $5K for compliance (a lot of parts need to be taken on and off, and stock parts fitted temporarily), then your on roads will cost about $6K due to stamp duty (3-4% in most places). All up this is an on-road cost of about $180K drive away. I may be wrong (this is off the top of my head), but I think these numbers are pretty close. So I doubt he's gonna shave $65K off just for you! Sadly, whilst this is just a supreme car, sometimes regulatory (and tax) limitations associated with importing just make certain deals not viable.

Edited by JesseJames
That's correct guys - price is AUD$115k.

Thanks

Phil

thats an absolute bargin mate... wish we had the money... and also for those that may not know, he is selling the car with its original NUR motor (it has a new one in it), so you get a complete collector car and another engine...

good luck with it mate, should have no issues

mate he'd be losing about $65K if he did this for someone. I'm guessing that $115K is the asking price ex-NZ, which means $11.5K duty, plus shipping and handling, app $13K GST, and then (due to the price) about $25K in luxury car tax (30% of the excess over $60K). This is $165K already, and then probably another $5K for compliance (a lot of parts need to be taken on and off, and stock parts fitted temporarily), then your on roads will cost about $6K due to stamp duty (3-4% in most places). All up this is an on-road cost of about $180K drive away. I may be wrong (this is off the top of my head), but I think these numbers are pretty close. So I doubt he's gonna shave $65K off just for you! Sadly, whilst this is just a supreme car, sometimes regulatory (and tax) limitations associated with importing just make certain deals not viable.

wat did u just dribble man .

mate he'd be losing about $65K if he did this for someone. I'm guessing that $115K is the asking price ex-NZ, which means $11.5K duty, plus shipping and handling, app $13K GST, and then (due to the price) about $25K in luxury car tax (30% of the excess over $60K). This is $165K already, and then probably another $5K for compliance (a lot of parts need to be taken on and off, and stock parts fitted temporarily), then your on roads will cost about $6K due to stamp duty (3-4% in most places). All up this is an on-road cost of about $180K drive away. I may be wrong (this is off the top of my head), but I think these numbers are pretty close. So I doubt he's gonna shave $65K off just for you! Sadly, whilst this is just a supreme car, sometimes regulatory (and tax) limitations associated with importing just make certain deals not viable.

I recently had an Aussie GTR enthusiast who was wanting to buy the Nur look into these costs and he concluded that all up it would be an additional AUD$20k.

Also, easy enough to minimise the duty obligations.

thats an absolute bargin mate... wish we had the money... and also for those that may not know, he is selling the car with its original NUR motor (it has a new one in it), so you get a complete collector car and another engine...

good luck with it mate, should have no issues

Thanks mate. Not only is it the rarest of the Nurs, but it's also been tuned by the legendary Mines company in Japan. For me, this just adds to its collectibility.

Considering the cost of a new R35, it is a bargin. All the money has been spent so the car is like new. Given its rare and collectable nature, it will likely appreciate over the years and will always appeal to the global car enthusiast market.

As you can see in the following link, a tuned GTR (R33 or R34) can still walk a new R35 around the track and my Nur has over 700hp.

Cheers

Phil

As you can see in the following link, a tuned GTR (R33 or R34) can still walk a new R35 around the track and my Nur has over 700hp.

prob a stock R35

*Xmas bump for a nice nur*

  • 2 weeks later...
prob a stock R35

*Xmas bump for a nice nur*

Thanks. For those interested, I took a few clips of my GTR recently. You can check them out here.

Enjoy

This was a once off - the only time I've ever launched it. 0-100 in under 4

http://www.youtube.com/watch?v=-HIBfsP1Fow

  • 1 month later...

Hey guys - baby due any day now. Car has to go to make way for a new family wagon.

Have reduced price from AUD $115 to just $95K!! Just had oil changed also.

Anyone interested, please call on +64 21 227 4001

I think I'd rather chop an arm off than sell that! THE best 34 GTR I've ever seen (these 3 pics below have been my wallpaper(s) for about a year!)

gtr_nur_1.jpg

gtr_nur_2.jpg

gtr_nur_3.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...