Jump to content
SAU Community

Recommended Posts

My old 33 didn't have one in the 4 1/2 years I owned it & I didn't have any issues, I just left it idling while I sorted my shiz

+1

My car doesn't have one & haven't had any engine related problems with the 2.5 years I owned it. I use my watch for the 15 to 30secs timing :P

i think the reason its illegal is because it is then an insurance liability, walk away with it on someone jumps in you claim...all coz ur silly, that way it being illegal you cant claim= same money for insurers... im just assuming here

Rest assured your assumption is incorrect. Have you ever tried to turn your steering wheel without the key in the ignition? Doesn't turn very far does it... good ole steering lock

I've often wondered about the underlying issue though as from what I remember there are certain turbo diesel 4x4's etc which actually have turbo timers from factory. My turbo timer is an integral part of my immobilizer, and one of my buttons on my remote turns the motor off by remote. A lot of grey area here indeed.

Front facing vents that aren't factory fitted need to pass criteria, and CAN be illegal.

Same with mascots, bonnet pins, etc ... anything that could be dangerous to somebody if they were hit by your rice rocket.

Guys, read the ADRs and VSB documents - don't just take a stab in the dark and dribble shit. This is why you all get yellow stickers.

Front facing vents that aren't factory fitted need to pass criteria, and CAN be illegal.

Same with mascots, bonnet pins, etc ... anything that could be dangerous to somebody if they were hit by your rice rocket.

Guys, read the ADRs and VSB documents - don't just take a stab in the dark and dribble shit. This is why you all get yellow stickers.

Yet you still see 4x4's and utes with massive steel gates on the front.

If they are supposed to stop the car getting damaged by cattle and roos, what are they gonna do to pedestrians etc.

But I guess it's ok since they are not carbon fibre right? lol

Like I said...criteria...go and do some reading.

Let me do it for you.

Start here:

http://www.infrastructure.gov.au/roads/veh...etin/index.aspx

VSB14

-> BODY MODIFICATIONS

--> SECTION 4.1 + 4.2 (BONNET SCOOTS AND PROJECTIONS + BONNET PINS + MASCOTS)

I'm amazed the old WRXs arent illegal considering that writeup. They look like shit and are dangerous to both driver and the poor people they hit.

Hahahaha how many F*CKING DEFECT TOPICS DOES THERE NEED TO BE!!?!?!?11???

Seriously, all of you just stfu about it. c*nt got defected because his car has defects. yeah, cops were douches to him. cops are douches to all young people with more-than-a-getz-spec performance...

except for cefiro drivers. because we're f*cking awesome like Sam Elliott.

I'm amazed the old WRXs arent illegal considering that writeup. They look like shit and are dangerous to both driver and the poor people they hit.

Yeah they look retarded but so do WRX's anyway. :)

Apparently they need them 'cos of the top mounted intercooler though?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...