Jump to content
SAU Community

Recommended Posts

yeah mate thats what they came off, havent got pics but mayb able to sort something out. looking at 2700 for the turbo and manifold, open to any suggestions as well. cheers Matt

Link to comment
https://www.sau.com.au/forums/topic/30121-assorted-bits/#findComment-613375
Share on other sites

  • 1 month later...

looking at only 1200 for the lot?? not sure on the wastegates. The manifold is back down at JMS you can give them a buzz to find out the size 0882606919

Also got the sub zero style plennum as well. If you have HPI issue 35 you can see it in there on my car. looking at 600 for that

Link to comment
https://www.sau.com.au/forums/topic/30121-assorted-bits/#findComment-658139
Share on other sites

yeah, mate still got the engine and head? the engine has been re-built with standard stuff and the head is of atm. what are you after?

Actually wondering if you still have the old motor not the new one. However want one with the head. Dont need any plenums or turbos and stuff. Just something to stick in the shed and start pulling down myself for a rebuild.

Link to comment
https://www.sau.com.au/forums/topic/30121-assorted-bits/#findComment-658151
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...