Jump to content
SAU Community

Recommended Posts

Hey guys and gals.

Up for sale is our Stagea. The reason for selling is it has accomplished its job of being a bigger car for the family and now we are looking to downsize to something smaller. The details are as follows...

Features of the car

* Air conditioning

* Power windows

* Folding rear seats

* Reclinable rear seats

* Power mirrors

* Cruise control

* Power steering

* Rear window wiper

* Shockers on the bonnet to hold it up

* ABS

* Driver and passenger airbags

* Rear cargo area 12V socket

* Hooks built into the rear cargo area floor pan, for use with tie-downs

* Cup holders front and rear

* Climate control

* Currently 150,000kms

Aftermarket modifications

Engine/Driveline:

* GCG highflow turbo (Cost $1950 + installation)

* Aftermarket exhaust from "Exhaust Technologies" in Adelaide (Was $1580 custom made)

* Highflow catalytic converter from www.bosimporting.com.au (Cost $440)

* Bosch 040 in-tank fuel pump (Cost $280 + installation)

* TRUST V-SPL GTR FMIC and custom made stainless steel piping, NO HOLES CUT for pipes in chassis! (Cost $450 for the intercooler, $600 for the piping, plus installation)

* Splitfire coilpacks (Cost $800)

* Apexi AFC Neo (Cost $600 + installation)

* Apexi SITC (Cost $250 + installation)

* Timing belt changed with 75,000km on the clock. Idler pullies/belt tensioners checked and found OK

* Upgraded automatic gearbox with an MV automatics valve body upgrade. (Cost $480 + installation)

* Larger Davies Craig transmission fluid cooler (Cost $150 + installation)

Brakes:

* Had the front and rear calipers checked, cleaned and rebuilt. At the same time installed DBA 4000 series rotors on the front, new Nissan rotors on the rear, new Nissan handbrake pads, New Bendix Ultimate pads on the front and Bendix pads on the rear. (From memory, was about $1500 total at the time)

Handling:

* FULL Bilstein/Whiteline suspension kit bought from http://www.skylinesaustralia.com/forums/in...showtopic=85592 including shocks/springs/castor bushes/camber bushes/subframe alignment kit/new bump stops/new dust covers (Cost ~$2250 + installation of bushes + wheel alignment)

* R33 GTST front strut brace, painted in black (Cost $80)

Body:

* Series 2 stagea front end update (Cost on the update was $14,500 including parts, painting, fitting, electrical changes, everything). Work performed by Luci and his crew at Melbourne F1 Panels in Fawkner.

* Blitz Bodykits fibreglass vented bonnet (cost $1800)

* Excellent condition Buddy Club P1 Plus II's. 19 x 9.5 All round fitted with Maxxis Maz1 245/35R19 tyres (cost $3000)

* Will include 4 standard R34 GTT wheels

Other:

* 2000kg capacity (Yes, TWO TONNE) tow bar from Towbars of Wooden in the ACT (Cost $560 + installation)

* Nesa DVD Headunit, Factory Nissan/Clarion in dash TV, Hertz HSK165 front splits, Hertz HCX165 rear 2-way speakers, Audison SRx 4 channel amplifier (Cost $1500 + installation)

* Cyclops 2 point immobilizer, black wired, Australian insurance compliant, installed at Performance Car Audio in Bayswater Melbourne (Cost $450 installed)

* Aftermarket cruise control (VERY VERY handy in Australia. Cost $500 + installation

It will be sad to see it go as its been a wonderful, comfortable and very reliable car that attracts alot of attention. Looking for offers around $18,000 including everything listed. May swap for a smaller car + cash adjustment my way for something of interest. If you have any questions just send me a pm.

Cheers Brad

post-50700-1261889312_thumb.jpg

post-50700-1261889342_thumb.jpg

post-50700-1261889375_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/301562-fs97-series-15-nissan-stagea/
Share on other sites

  • 2 weeks later...
  • 4 weeks later...
  • 1 month later...
  • 2 weeks later...
  • 4 weeks later...

Hey mate, you're just the person i've been looking for :P

Not exactly sure what you are after when you say smaller car but I've got an S14 that I have been wanting to swap for a Stagea of the same value. I live in SA but would be happy to sort out transport arrangemnt etc. Also if you dont think it's a fair trade, let me know what you are thinking because this could be a win-win for the both of us :)

Here is the link to my original request for a swap- http://www.skylinesaustralia.com/forums/Sa...01#entry5211901

Just an update- car will be getting a 3/4 of the car will be getting a respray very shortly so it will look pretty sweet.

Thanks mate,

Kenny

Hey mate, you're just the person i've been looking for :(

Not exactly sure what you are after when you say smaller car but I've got an S14 that I have been wanting to swap for a Stagea of the same value. I live in SA but would be happy to sort out transport arrangemnt etc. Also if you dont think it's a fair trade, let me know what you are thinking because this could be a win-win for the both of us :)

Here is the link to my original request for a swap- http://www.skylinesaustralia.com/forums/Sa...01#entry5211901

Just an update- car will be getting a 3/4 of the car will be getting a respray very shortly so it will look pretty sweet.

Thanks mate,

Kenny

also if u are looking for a small car for fuel economy, I seriously get 600km per tank in my s14... Most fuel efficient car I've ever owned!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...