Jump to content
SAU Community

Recommended Posts

I have a few parts left from a performance build that had a change of direction so they are no longer needed,

1. Tomie ProCams for RB25det 270 degree rotation 10.25mm lift, these are as big as you can get for the 25, brand new in the box, $800 firm

and yes your head will need modification to fit these as they are too big for the stock internals, you will also lose your variable timeing.

2. 600x300x115 HKS drag mount front mount intercooler, genuine item that was bought off a HKS demo drag car putting out 1000Hp, these are worth thousands brand new $850

3. 90mm Q45 AFM, second hand, perfect condition, has wireing plug with it also, $200ono

4. 1000cc HKS injectors, brand new, only open and dummy fitted to my rail and plenum to ensure they would all fit. these are worth 300 each, im seelin at under half this, $800 for set,

5. Greddy duel feed fuel rail, annodised blue, brand new, bought for $400 selling for $250

if you buy both the injectors and fuel rail i will sell for $1000

all items are in excellent condition (some brand new)

located on the gold coast but can post at buyers expense.

casey 0415 931 375

post-31239-1262480960_thumb.jpg

post-31239-1262481016_thumb.jpg

post-31239-1262481074_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/302262-performance-parts/
Share on other sites

"top feed,

will suit rb25, rb26 etc"

arent RB20 & RB26 injectors top feed, while RB25 injectors are side feed??

sorry,

the injectors will suit rb20 and rb26 with standard rail but will suit rb25 with top feel fuel rail (which i also have for sale)

so they can actually suit anything

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...